FYLP-3W-UPGS

HIGH POWER FYLP FYL FYLP-3W-UPGS Features: Very Long operating life Highest flux Available in Pure Green. Lambertian radiation pattern More energy efficient than incandescent and most halogen lamps Low voltage DC operated Cool beam,safe to the touch Instant light (less than 100ns) Fully dimmable No UV Lower Rth ROHS compliant Radiation Pattern Relative Lumionous Intensity LOP @max=1) Package Dimensions Applications Reading lights(car, bus, aircraft) LCD Backlights /light Guides Fiber optic alternative/Decorative/Entertainment Mini-accent/Up lighters/Down lighters/ Orientation Indoor/Outdoor commerclal and Residentlal Architectural Cove/Under shelf /Task Bollards/Security/Garden Portable (flashlight, bicycle) Edge-lit signs (Exit, point of sale) Automotive Exit (stop –tail-Turn ,CHMSL,Mirror Side Repeat) Traffic signaling /Beacons/rail Crossing and Wayside 20(.787) 6(.236)±0.1(.004) 15(.59) （ 8(.315)±0.1(.004) 1.3(.05)±0.1(.004) + 2(.0787) + + 4(.157) 60° HIGH Typical Optical/Electrical Characteristics@TJ=25℃ POWER Item Forward Voltage Reverse Current 50% Power Angle Luminous Intensity Recommend Forward Current Wave length Thermal Resistance,Junction to Case symbol Condition VF IR 2θ1/2 Фv IF λd Rjp IF=350mA IF=350mA IF=800mA VR=5V IF=800mA IF=800mA Min 3.4 70 515 Typ 3.6 175 80 800 520 10 Max 4.0 50 - Unit V uA deg LM mA 525 nm ℃/W Notes: 1. Tolerance of measurement of forward voltage±0.1v 2. Tolerance of measurement of peak Wavelength ±2.0nm 3. Tolerance of measurement of luminous intensity ±15%. Absolute Maximum Rating Item Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Electrostatic discharge Operation Temperature Storage Temperature Lead Soldering Temperature* symbol IF IFD VR PD ESD TOPR TSTG TSOL Absolute Maximum Rating 800 1200 5 3000 ±4500 -30℃ to +80℃ -40℃ to +100℃ 260℃ for 3 Seconds Max Unit mA mA V mW V IFP Conditions :Pulse Width≤10 msec duty≤1/10 All high Power emitter LED products mounted on aluminum metal-core printed circuit board, can be lighted directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. Re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. Suggest to solder it by professional high power LED soldering machine. Can use invariable –temperature searing-iron with soldering condition: ≤260 degreen less than 3 seconds. HIGH POWER Typical optical/Electrical Characteristics Curves (Tj=25℃ Unless Otherwise Noted) Spectral Response Reduance Peak@520nm /Pure green Normalized Wave Length(nm) Forward Current Vs Forward Voltage 600 Relative Luminous intensity vs Forward current 6.0 Forward Current(mA) Relative Intensity (Lop@20mA=1) 500 5.0 4.0 3.0 2.0 1.0 0 400 300 200 0 1.6 2.2 2.8 3.4 4.0 4.6 0 350 Forward 400 C u r r e n t I F ( m A 600 ) 500 Forward Voltage(V) Luminous Intensity Vs. Ambient Temperature Forward Current Derating Curve 600 500 400 300 200 100 0 0 40 80 120 160 200 Relative Luminous Intensity 250 200 150 100 50 0 -20 0 20 40 60 80 100 Forward Current(mA) Ambient Temperature TA( C) Ambient Temperature TA( C )