FYLP-5W-PGL

HIGH POWER FYLP FYL PGL FYLP-5W-PGL Features: Long operating life Highest flux per Led family in the world. Available in Pure green Lambertian radiation pattern More energy efficient than incandescent and most halogen lamps Low voltage DC operated Cool beam,safe to the touch Instant light (less than 100ns) Fully dimmable. No UV Superior ESD protection Eutectic die bonding ROHS compliant Instant light Radiation Pattern Relative Lumionous Intensity(LOP @max=1) Package Dimensions 20(.787) 15(.59) 6.8(.268)±0.1(.004) Applications Reading lights (car,bus,aircraft) LCD Backlights /light Guides Fiber optic alternative/Decorative/Entertainment Mini-accent/Up lighters/Down lighters/ Orientation Indoor/Outdoor commerclal and Residentlal Architectural Cove/Under shelf /Task Bollards/Security/Garden Portable(flashlight,bicycle) Edge-lit signs (Exit, point of sale) Automotive Exit (stop –tail-Turn ,CHMSL,Mirror Side Repeat) Trafficsignaling /Beacons/railCrossing and Wayside. 7.85(.31) + + + 7.3（0.287）±0.1(.004) 4.5(.177) 1.5(.06) - 4 60° HIGH POWER Typical Optical/Electrical Characteristics@TJ=25℃ Item Forward Voltage Reverse Current 50% Power Angle Luminous Intensity Recommend Forward Current Wave length Thermal Resistance,Junction to Case symbol Condition VF IR 2θ1/2 Фv IF λd Rjp IF=1.2A IF=1.2A IF=1.2A VR=5V IF=1.2mA IF=1.2mA Min 3.2 100 130 520 Typ -110 150 1.2 -18 Max 4.2 50 120 525 Unit V uA deg LM A nm ℃/W Notes: 1. Tolerance of measurement of forward voltage±0.1v 2. Tolerance of measurement of peak Wavelength ±2.0nm 3. Tolerance of measurement of luminous intensity ±15%. Absolute Maximum Rating Item Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Electrostatic discharge Operation Temperature Storage Temperature Lead Soldering Temperature* symbol IF IFD VR PD Esd TOPR TSTG TSOL Absolute Maximum Rating 1.2 1.3 5 5 4500 -30℃ to +80℃ -40℃ to +100℃ 260℃ for 3 Seconds Max Unit A A V W V IFP Conditions :Pulse Width≤10 msec duty≤1/10 All high Power emitter LED products mounted on aluminum metal-core printed circuit board, can be lighted directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. Re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. Sueggest to solder it by professional high power LED soldering machine. Can use invariable –temperature searing-iron with soldering condition: ≤260 degreen less than 3 seconds. HIGH POWER Typical optical/Electrical Characteristics Curves (Tj=25℃ Unless Otherwise Noted)