FYLS-0805PGC

SMD FYLS- 0805PGC Features: Compatible with automatic placement equipment. Compatible with reflow solder process. Radiation pattern. Applications: Automotive-Telecommunication. Indicators. Water clear Illuminations. Relative Lumionous Intensity(LOP @max=1) Descriptions: Dice material: InGaN Emitting Color: Super bright Pure Green Lens Color: Water clear. Absolute maximum ratings(Ta=25 ゜с) Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 25℃ Operating Temperature Range Storage Temperature Range MAX. Unit 70 100 20 0.4 mW mA mA mA/℃ -30℃ to +80℃ -40℃ to +85℃ Electrical and optical characteristics(Ta=25 ゜с) Parameter Luminous Intensity Viewing Angle Peak Emission Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current Symbol IV 2θ1/2 λp λd △λ VF IR Min. --515 520 25 Typ. 200 140 520 -30 3.2 Max. --525 525 35 3.6 10 Unit mcd Deg nm nm nm V µA Test Condition IF=20mA VR=5V SMD Typical Electrical Characteristics Curves (25 ゜с Ambient Temperature Unless Otherwise Noted) (1) Normalized Response (1)peak@520nm/pure green Wave Length(nm) Forward Current Derating Curve 60 Relative Luminous intensity vs Forward current Forward Current(mA) 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 Relative Intensity (Lop@20mA=1) Forward Current IF(mA) Ambient Temperature TA ( Forward Current vs.Forward Voltage ) luminous Intensity Vs.Ambient Temperature °C Forward Current If(mA) Forward Voltage VF( V) luminous Intensity (IV) -20 0 20 40 60 80 Ambient Temperature C SMD Precautions For Use 1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before opening the package, The max. storage period before opening the package is 1 year. 2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it should be used within3 hours. In the event of incomplete usage, it is advised that user preheat the remaining devices at 60±5℃ for 8 hours prior to use. 3. Reflow soldering should not be done more than twice. When soldering, don’t tress on LEDs during heating. After soldering, don’t warp the circuit board. 4. Repair should not be done after the LEDs have been soldered. When repair is unavoidable, Double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repair or not. Soldering Iron: Temperature at tip of iron:300 ゜с Max.(25W Max) Soldering time: 3±1sec. Please refer to the following figure： SMD Package Dimensions of Device 1.25 Cathode Mark Soldering Terminal 0.3 0.4 lED Die 1.4 1.25 2.0 PCB 1.0 1.2 Resin 0.9 1.2 0.3 0.625 0.8 0.4 Tape Specification: 3000pcs Per Reel. Packing Size Item Spec. Tolerance Item Spec. Tolerance W P1 E F D0 Unit:mm D1 P0 1.2 Unit mm mm 8.00 ±0.20 10P0 40.00 ±0.20 Cathode 4.00 ±0.10 P2 2.00 ±0.05 D0 P2 1.75 ±0.10 A0 1.85 ±0.10 3.50 ±0.05 B0 3.45 ±0.10 P0 1.50 +0.1/-0 K0 1.27 ±0.10 1.00 ±0.05 T 0.22 ±0.05 E K0 4.00 ±0.05 Unit mm mm A' D1 F W 5° P1 A0 A' SEC:A-A' t Package Dimensions of Reel: 60+0.5/-0 13.5±0.2 178±1.0 Unit:mm 12±0.15 9±0.1 Packing and Shipping Spec. SMD L1 sb sb Zip-lock Desiccant Antistatic Bag W1 Desiccant Spec. Spec. 203.0. Spec. 198.0 Unit:mm Box Dimension(cm):30 * 19* 11.5 ) cs (p TY Q' . NO RT PA 10 Reels per box CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs S KG S KG W M G. 8C *3 W N. 8*31 :3 AS ME C/NO