FYLS-0805UEC

L ED LAMP FYLS-0805UEC Features: Compatible with automatic placement equipment Compatible with reflow solder process. Radiation pattern. Applications: Automotive-Telecommunication Indicators Lcd Back-lights Illuminations Relative Lumionous Intensity LOP @max=1) Descriptions: Dice material: AlGaAs. Emitting Color: hight Red. Lens Color: Water clear. Absolute maximum ratings(Ta=25 ゜с) Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 25℃ Operating Temperature Range Storage Temperature Range MAX. Unit 78 100 30 0.4 （ mW mA mA mA/℃ -30℃ to +80℃ -40℃ to +85℃ Electrical and optical characteristics(Ta=25 ゜с) Parameter Luminous Intensity Viewing Angle Peak Emission Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current Symbol IV 2θ1/2 λp λd △λ VF IR Min. --620 615 25 Typ. 70 130 625 620 30 1.9 Max. --630 625 35 2.1 10 Unit mcd Deg nm nm nm V µA Test Condition IF=20mA VR=5V L ED LAMP Typical Electrical Characteristics Curves (25 ゜с Ambient Temperature Unless Otherwise Noted) peak@620nm /Orange Forward Current Vs Forward Voltage 50 40 30 20 10 0 1.5 1.7 1.9 2.1 2.2 2.3 2.5 2.7 2.9 3.1 3.3 Relative Luminous intensity vs Forward current Forward Current(mA) Relative Intensity (Lop@20mA=1) Forward Current IF(mA) Forward Voltage(V) Forward Current Derating Curve 60 Forward Current(mA) 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 AlGaAs or AlGaInP GaP Relative Luminous Intensity Luminous Intensity Vs. Ambient Temperature Ambient Temperature TA( ) Ambient Temperature TA( C ) L ED LAMP Precautions For Use 1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before opening the package, The max. storage period before opening the package is 1 year. 2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it should be used within3 hours. In the event of incomplete usage, it is advised that user preheat the remaining devices at 60±5℃ for 8 hours prior to use. 3. Reflow soldering should not be done more than twice. When soldering, don’t tress on LEDs during heating. After soldering, don’t warp the circuit board. 4. Repair should not be done after the LEDs have been soldered. When repair is unavoidable, Double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repair or not. Soldering Iron: Temperature at tip of iron:300 ゜с Max.(25W Soldering time: 3±1sec. Max) Reflow Temp./Time: Please refer to the following figure： L ED LAMP Package Dimensions of Device Soldering Terminal 1.25 Cathode Mark 0.3 0.4 lED Die 1.4 1.25 2.0 PCB 1.0 1.2 Resin 0.9 1.2 0.3 0.625 0.8 0.4 Unit:mm Tape Specification: 4000pcs Per Reel. Packing Size Item Spec. Tolerance Item Spec. Tolerance W P1 E F D0 D1 P0 1.2 Unit mm mm 8.00 ±0.20 10P0 40.00 ±0.20 Cathode 4.00 ±0.10 P2 2.00 ±0.05 D0 P2 1.75 ±0.10 A0 1.40 ±0.10 3.50 ±0.05 B0 2.25 ±0.10 P0 1.50 +0.1/-0 K0 1.1 ±0.10 1.0 ±0.05 T 0.23 ±0.05 E A' 4.00 ±0.05 Unit mm mm K0 F W D1 P1 A0 A' t SEC:A-A' Package Dimensions of Reel: 60+0.5/-0 13.5±0.2 178±1.0 12±0.15 9±0.1 B0 Unit:mm L ED LAMP Packing and Shipping Spec. L1 sb sb Zip-lock Desiccant Antistatic Bag W1 Desiccant Spec. Spec. 203.0. Spec. 198.0 Unit:mm Box Dimension(cm):30 * 19* 11.5 ) cs (p TY Q' . NO RT PA 10 Reels per box CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs S KG S KG W G. CM 38 .W *31* N8 :3 AS ME C/NO