FYLS-0805UGC

SMD FYLS - 0805UGC Features: Compatible with automatic placement equipment. Compatible with reflow solder process. Radiation pattern. Applications: Automotive-Telecommunication. Indicators. Lcd Back-lights. Illuminations. Relative Lumionous Intensity(LOP @max=1) Descriptions: Dice material: AlGaInP Emitting Color: Yellow Green Lens Color: Water clear. Absolute maximum ratings(Ta=25 ゜с) Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 25℃ Operating Temperature Range Storage Temperature Range MAX. Unit 78 100 30 0.4 mW mA mA mA/℃ -30℃ to +80℃ -40℃ to +85℃ Electrical and optical characteristics(Ta=25 ゜с) Parameter Luminous Intensity Viewing Angle Peak Emission Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current Symbol IV 2θ1/2 λp λd △λ VF IR Min. -569 570 15 -- Typ. 50 130 574 575 20 1.9 Max. -579 580 25 2.3 10 Unit mcd Deg nm nm nm V µA Test Condition IF=20mA VR=5V SMD Typical Electrical Characteristics Curves (25 ゜с Ambient Temperature Unless Otherwise Noted) Spectral Reduance Normalized Response (1) peak@574nm / Green Wave Length(nm) Forward Current Vs Forward Voltage 50 40 30 20 10 0 Relative Luminous intensity vs Forward current Forward Current(mA) 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.1 3.3 3.5 Relative Intensity (Lop@20mA=1) Forward Voltage(V) Forward Current IF(mA) Forward Current Derating Curve Luminous Intensity VsAmbient Temperature 60 Relative Luminous Intensity 50 Forward Current(mA) 40 30 20 10 0 10 20 30 40 50 60 ) 70 80 90 Ambient Temperature TA( Ambient Temperature TA( C ) SMD Precautions For Use 1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before opening the package, The max. storage period before opening the package is 1 year. 2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it should be used within3 hours. In the event of incomplete usage, it is advised that user preheat the remaining devices at 60±5℃ for 8 hours prior to use. 3. Reflow soldering should not be done more than twice. When soldering, don’t tress on LEDs during heating. After soldering, don’t warp the circuit board. 4. Repair should not be done after the LEDs have been soldered. When repair is unavoidable, Double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repair or not. Soldering Iron: Temperature at tip of iron:300 ゜с Max.(25W Max) Soldering time: 3±1sec. Reflow Temp./Time: Please refer to the following figure： SMD Package Dimensions of Device . Soldering Terminal 1.25 Cathode Mark 0.3 0.4 lED Die 1.4 1.25 2.0 PCB 1.0 1.2 Resin 0.9 1.2 0.3 0.625 0.8 0.4 Unit:mm(inches) Tape Specification: 4000pcs Per Reel. Item Spec. Tolerance Item Spec. Tolerance W P1 E F D0 D1 P0 1.2 Unit mm inches mm inches 8.00 0.32 ±0.20 ±0.0078 10P0 40.00 1.57 ±0.20 ±0.0078 Cathode 4.00 0.16 ±0.10 ±0.004 P2 2.00 0.08 ±0.05 ±0.002 1.75 0.07 ±0.10 ±0.07 A0 1.85 0.07 ±0.10 ±0.004 P2 3.50 0.14 ±0.05 ±0.002 B0 3.45 0.14 ±0.10 ±0.004 P0 1.50 0.06 +0.1/-0 ±0.004/0 K0 1.1 0.05 ±0.10 ±0.004 1.00 0.04 ±0.05 ±0.002 T 0.22 0.01 ±0.05 ±0.002 E 4.00 0.16 ±0.05 ±0.002 Unit mm inches mm inches K0 D0 A' 5° P1 A0 A' SEC:A-A' Package Dimensions of Reel: sb ? 60(2.36)+ .5(.0197)/-0 ? 178(7.0)± 1.0(.04) 9.0(.35)±0.2(.0078) 12.0(.47)±0.15(.006)) ? 13.5(.53)± 0.2(.008) Unit:mm(inches) Packing and Shipping Spec. B0 t D1 F W SMD L1 sb sb Zip-lock Desiccant Antistatic Bag W1 Desiccant Spec. Spec. 203.0. Spec. 198.0 Unit:mm Box Dimension(cm):30 * 19* 11.5 ) cs (p TY Q' . NO RT PA 10 Reels per box CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs S KG S KG W M G. 8C *3 W N. 8*31 :3 AS ME C/NO