SMD
FYLS - 1206GC
Features:
Compatible with automatic placement equipment. Compatible with reflow solder process.
Radiation pattern.
Applications:
Automotive-Telecommunication. Indicators. Lcd Back-lights. Illuminations.
Relative Lumionous Intensity(LOP @max=1)
Descriptions:
Dice material: GaP Emitting Color: Yellow Green Lens Color: Water clear.
Absolute maximum ratings(Ta=25 ゜с)
Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 25℃ Operating Temperature Range Storage Temperature Range MAX. Unit
78 100 30 0.4
mW mA mA mA/℃
-30℃ to +80℃ -40℃ to +85℃
Electrical and optical characteristics(Ta=25 ゜с) Parameter
Luminous Intensity Viewing Angle Peak Emission Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current
Symbol
IV 2θ1/2 λp λd △λ VF IR
Min.
-569 565 15 --
Typ.
15 130 574 570 20 1.9
Max.
-579 575 25 2.3 10
Unit
mcd Deg nm nm nm V µA
Test Condition
IF=20mA
VR=5V
SMD
Typical Electrical Characteristics Curves (25 ゜с Ambient Temperature Unless Otherwise Noted)
Spectral Reduance
Normalized Response
(1) peak@574nm / Green
Wave Length(nm)
Forward Current Vs Forward Voltage
50 40 30 20 10 0
Relative Luminous intensity vs Forward current
Forward Current(mA)
1.5
1.7
1.9
2.1
2.3
2.5
2.7
2.9
3.1
3.3 3.5
Relative Intensity (Lop@20mA=1)
Forward Voltage(V)
Forward Current IF(mA)
Forward Current Derating Curve
Luminous Intensity VsAmbient Temperature
60
Relative Luminous Intensity
50
Forward Current(mA)
40 30 20 10 0 10 20 30 40 50 60 ) 70 80 90
Ambient Temperature TA(
Ambient Temperature TA( C )
SMD
Precautions For Use
1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before opening the package, The max. storage period before opening the package is 1 year. 2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it should be used within3 hours. In the event of incomplete usage, it is advised that user preheat the remaining devices at 60±5℃ for 8 hours prior to use. 3. Reflow soldering should not be done more than twice. When soldering, don’t tress on LEDs during heating. After soldering, don’t warp the circuit board. 4. Repair should not be done after the LEDs have been soldered. When repair is unavoidable, Double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repair or not.
Soldering Iron:
Temperature at tip of iron:300 ゜с Max.(25W Max) Soldering time: 3±1sec.
Reflow Temp./Time:
Please refer to the following figure:
SMD
Package Dimensions of Device .
Soldering Terminal
1.6
Cathode Mark
0.6
LED Die
2.0
3.2
PCB
2.0
1.6
1.5
Resin
2.0
1.5
0.8
1.1
0.5 0.6
Unit:mm(inches)
Tape Specification: 3000pcs Per Reel.
Item Spec. Tolerance Item Spec. Tolerance
W P1 E F D0 D1 P0
8.00 0.32 ±0.20 ±0.0078 10P0 40.00 1.57 ±0.20 ±0.0078
Cathode
4.00 0.16 ±0.10 ±0.004 P2 2.00 0.08 ±0.05 ±0.002
1.75 0.07 ±0.10 ±0.07 A0 1.85 0.07 ±0.10 ±0.004
P2
3.50 0.14 ±0.05 ±0.002 B0 3.45 0.14 ±0.10 ±0.004
P0
1.50 0.06 +0.1/-0 ±0.004/0 K0 1.1 0.05 ±0.10 ±0.004
1.00 0.04 ±0.05 ±0.002 T 0.22 0.01 ±0.05 ±0.002
E
4.00 0.16 ±0.05 ±0.002
1.5
Unit
mm inches mm inches
Unit
mm inches mm inches
K0
D0
A'
5° P1 A0
A' SEC:A-A'
Package Dimensions of Reel:
sb
? 60(2.36)+ .5(.0197)/-0
? 178(7.0)± 1.0(.04)
9.0(.35)±0.2(.0078) 12.0(.47)±0.15(.006))
? 13.5(.53)± 0.2(.008)
Unit:mm(inches)
Packing and Shipping Spec.
B0 t
D1
F W
SMD
L1
sb
sb
Zip-lock
Desiccant Antistatic Bag
W1
Desiccant Spec.
Spec. 203.0.
Spec. 198.0
Unit:mm
Box Dimension(cm):30 * 19* 11.5
) cs (p TY Q' . NO
RT PA
10 Reels per box
CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs
S KG S KG W M G. 8C *3 W N. 8*31 :3 AS ME
C/NO
很抱歉,暂时无法提供与“FYLS-1206GC”相匹配的价格&库存,您可以联系我们找货
免费人工找货