603-25-150

Fox Part Number: 603-25-150 LEAD-FREE, CERAMIC, SMD, CRYSTAL MODEL: C3BS (Formerly FX325BS Series) RoHS / REACH Compliant / Pb-Free For Use with IDT Part Numbers: 6V49205B 9FGU0231 9FGU0241 9FGU0431 9FGU0441 9FGU0631 9FGU0641 9FGU0831 9FGU0841 9FGV0231 9FGV0241 9FGV0431 9FGV0441 9FGV0631 9FGV0641 9FGV0831 9FGV0841 IDT5U49319 A. Specifications Parameters Frequency Resonance Mode Frequency Tolerance @ 25°C Frequency Stability, ref @ 25°C Over Operating Temp. Range Temperature Range Operating (TOPR) Storage (TSTG) Equivalent Series Resistance (ESR) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish: Weight (TYP) IDT6P41302 IDT6P41322 IDT6V49205A 5P49V5901A 5P49V5913A 5P49V5914A 5P49V5923A 5P49V5925A 5P49V5927A 5P49V5929A B. Mechanical / Dimensions: 25.000 MHz Fundamental ±20PPM Max ±20PPM Max 0°C ~ +70°C -55°C ~ +125°C 50 Ohms Max 3pF Max 8pF 0.3mW Max ±5PPM Max 260°C / 10 Seconds x2 1 Au over Ni 22.754 mg Tape & Reel details on page 2 NOTE: The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Reference / Comments Title / Description: Product Specifications Drawing Number: DWG-6881 Rev: D Size: A Part Number: 603-25-150 Cage: 61429 Draftsperson: BEC Approved: MAJ Date: 10-24-2019 Page 1 of 2 Fox Part Number: 603-25-150 LEAD-FREE, CERAMIC, SMD, CRYSTAL MODEL: C3BS (Formerly FX325BS Series) RoHS / REACH Compliant / Pb-Free Tape & Reel Specification Tape Specifications (millimeters) A B C D E F STD Reel QTY Ø1.55 4.0 4.0 3.5 8.0 1.3 3,000 Reel Specifications (millimeters) G H I J K L M 2.0 Ø13 Ø21 Ø80 Ø180 9.0 2.0 PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or noninfringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics. Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective thirdparty owners. For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html. NOTE: The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Reference / Comments Title / Description: Product Specifications Drawing Number: DWG-6881 Rev: D Size: A Part Number: 603-25-150 Cage: 61429 Draftsperson: BEC Approved: MAJ Date: 10-24-2019 Page 2 of 2