FC1BAFBDI25.0-T3

FC1BA 2.0mm x 1.6mm Auto Grade Crystal (Former FXA2016B) Features • • • • AEC Q200 Qualified IATF-16949 QMS Tolerances down to ±10 PPM Stabilities down to ±20 PPM STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C MAX (Unless otherwise noted) 16.000 ~ 54.000 MHz (See options below) (See options below) Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year (@ 25°C) See options below -55°C ~ +150°C 3 pF (See options below) 100 µW ±5 PPM Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish 260°C / 10 Seconds x 2 N/A Seal Method Lead (Pb) Free RoHS Compliant Au (0.3~1.0µm) over Ni (1.27~8.89µm) Seam Yes Yes, no exemptions REACH Compliant (latest version) Yes Frequency Range (MHz) 16.000 ~ 19.199999 19.200 ~ 25.999999 26.000 ~ 35.999999 36.000 ~ 54.000 DIMENSIONS / MECHANICAL SPECIFICATIONS Operating Mode Max ESR Ω Fundamental Fundamental Fundamental Fundamental 200 100 80 60 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. AVAILABLE OPERATING TEMPERATURES AND STABILITIES Operating Temperature -40°C ~ +85°C -40°C ~ +105°C -40°C ~ +125°C -55°C ~ +125°C Revised A: 07/21/2020 ±20 PPM ±25 PPM O O X X X X X X Key: O = Available, X = Not Available Page 1 of 2 ±30 PPM ±50 PPM ±100 PPM O O X X O O O O O O O O www.foxonline.com FC1BA 2.0mm x 1.6mm Auto Grade Crystal (Former FXA2016B) TAPE SPECIFICATIONS (mm) A B C D E F ø1.55 4.0 4.0 3.5 8.0 0.65 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.5 Ø13 Ø21 Ø60 Ø180 9.0 2.0 Available Options & Part Identification for Automotive Crystal Model C1BA1 Sample PN: FC1BABCVI40.0-T1 F C1BA Fox Model Number B C Tolerance Stability B = ±50 PPM A = ±100 PPM C = ±30 PPM B = ±50 PPM D = ±25 PPM C = ±30 PPM E = ±20 PPM D = ±25 PPM F = ±15 PPM E = ±20 PPM H = ±10 PPM V I 40.0 -T1 Load Capacitance2 V=7pF D=8pF E=10pF G=12pF J=15pF K=16pF L=18pF M=20pF Operating Temperature M = -40 to +85°C P = -40 to +105°C I = -40 to +125°C T = -55 to +125°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 07/21/2020 Page 2 of 2 www.foxonline.com