FC2BABAJM20.0-T3

2.5 x 2.0mm Auto Grade Crystal C2BA (former FXA2520B) DATASHEET     AEC Q200 Qualified IATF-16949 QMS Tolerances down to ±10 PPM Stabilities down to ±20 PPM • SPECIFICATIONS MAX (unless otherwise noted) PARAMETERS Frequency Range Frequency Tolerance @ 25ºC Frequency Stability, ref @ 25ºC Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (C0) Load Capacitance (CL) Drive Level Aging per year Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free RoHS Compliant Frequency Range (MHz) 12.000 ~ 13.999999 14.000 ~ 15.999999 16.000 ~ 19.999999 20.000 ~ 23.999999 24.000 ~ 24.999999 25.000 ~ 44.999999 45.000 ~ 54.000 12.000 ~ 54.000 MHz (See options on page 2) (See options below) See options below -55ºC ~ +150ºC 3pF (See options on page 2) 100µW ±5 PPM 260ºC / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Operating Mode Max ESR Ω Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 200 150 90 70 60 50 40 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. •Available Operating Temperatures and Stabilities Operating Temperature -40 ~ +85ºC -40 ~ +105ºC -40 ~ +125ºC -55 ~ +125ºC ±20 PPM ±25 PPM ±30 PPM ±50 PPM ±100 PPM O X X X O X X X O O X X O O O O O O O O Key: O=Available, X=Not Available, 1 Does not imply stocked part. Reference / Comments © Copyright 2019 Fox Electronics. All rights reserved Title / Description: C2BA SERIES STANDARD SPECIFICATIONS Drawing Number: C2BA-DOC-2 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Date: 06/04/2019 2.5 x 2.0mm Auto Grade Crystal C2BA (former FXA2520B) DATASHEET • TAPE SPECIFICATIONS (millimeters) B A 1.55 4.0 C 4.0 D 3.5 E 8.0 • REEL SPECIFICATIONS (millimeters) F Reel QTY G H I J K L M 0.8 -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 2.5 13 21 60 180 9.0 2.0 1.75 Available Options & Part Identification for Automotive Crystal Model C2BA1 F C2BA B C V I 40.0 F C2BA B C V FOX Model Number Tolerance Stability B = ±50 PPM C = ±30 PPM D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM A = ±100 PPM B = ±50 PPM C = ±30 PPM D = ±25 PPM E = ±20 PPM Load Capacitance2 V=7pF D=8pF E=10pF G=12pF J=15pF K=16pF L=18pF M=20pF I 40.0 Frequency Operating (MHz) Temperature M = -40 to +85°C P = -40 to +105°C I = -40 to +125°C T = -55 to +125ºC 1Not 2 all frequency, tolerance, stability, load, and operating temperature combinations may be available. Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact Fox Technical Support for assistance Corporate Headquarters 5570 Enterprise Parkway Fort Myers, FL 33905 http://www.FOXONLINE.com Sales 1-888-GET-2-FOX (1-888-438-2369) or 1-239-693-0099 http://www.FOXONLINE.com/repdisty Tech Support http://www.FOXONLINE.com/email PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics. Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners. For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html . Reference / Comments © Copyright 2019 Fox Electronics. All rights reserved Title / Description: C2BA SERIES STANDARD SPECIFICATIONS Drawing Number: C2BA-DOC-2 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Date: 06/04/2019