FC2BSCBDM32.0-T3

FC2BS 2.5mm x 2.0mm SMD Crystal (Former FX252BS) Features • • Tolerances down to ±10 PPM Stabilities down to ±10 PPM STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) MAX (Unless otherwise noted) 12.000 ~ 80.000 MHz (See options below) (See options below) Load Capacitance (CL) Drive Level Aging per year (@ 25°C) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish Seal Method Lead (Pb) Free RoHS Compliant (See options below) 100 µW ±5 PPM 260°C / 10 Seconds 1 DIMENSIONS / MECHANICAL SPECIFICATIONS (See options below) -55°C ~ +125°C 3 pF Au over Ni Seam Yes Yes Frequency Range (MHz) Operating Mode Max ESR Ω 12.000 ~ 13.999999 14.000 ~ 15.999999 16.000 ~ 19.999999 20.000 ~ 23.999999 24.000 ~ 24.999999 25.000 ~ 44.999999 45.000 ~ 80.000 Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 200 150 90 70 60 50 40 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. AVAILABLE OPERATING TEMPERATURES AND STABILITIES* Operating Temperature ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM ±50 PPM 0°C ~ +70°C O O O O O O -10°C ~+60°C O O O O O O -10°C ~+70°C O O O O O O -20°C ~+70°C O O O O O O -30°C ~+85°C X O O O O O -40°C ~+85°C X O O O O O -40°C ~+105°C X X X X X O -40°C ~+125°C X X X X X O -55°C ~+125°C X X X X X O Key: O = Available, X = Not Available, N/A = Not applicable *Does not imply a stocked part. Revised A: 06/03/2019 Page 1 of 2 ±100 PPM N/A N/A N/A N/A N/A N/A O O O www.foxonline.com FC2BS 2.5mm x 2.0mm SMD Crystal (Former FX252BS) TAPE SPECIFICATIONS (mm) A B C D E F ø1.55 4.0 4.0 3.5 8.0 0.65 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø60 Ø180 9.0 2.0 Available Options & Part Identification for SMD Crystal C2BS1 Sample PN: FC2BSCCDM24.0-T3 F C2BS Fox Model Number 1 2 C C Tolerance Stability B = ±50 PPM A = ±100 PPM C = ±30 PPM B = ±50 PPM D = ±25 PPM C = ±30 PPM E = ±20 PPM D = ±25 PPM F = ±15 PPM E = ±20 PPM H = ±10 PPM F = ±15 PPM H = ±10 PPM D M 24.0 -T3 Load Capacitance2 D = 8pF W = 9pF E = 10pF G = 12pF L = 18pF M = 20pF Operating Temperature C = 0 to +70°C D = -10 to +60°C E = -10 to +70°C F = -20 to +70°C K = -30 to +85°C M = -40 to +85°C P = -40 to +105°C I = -40 to +125°C T = -55 to +125°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 06/03/2019 Page 2 of 2 www.foxonline.com