FC3BSBBEF27.12-T3

FC3BS 3.2mm x 2.5mm Ceramic SMD Crystal (Former FX325BS) STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year (@ 25°C) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish MAX (Unless otherwise noted) 8.000 ~ 54.000 MHz (See options below) (See options below) (See options below) -55°C ~ +125°C 3.0 pF (See options below) 100 µW ±5 PPM 260°C / 10 Seconds 1 Au (0.3~1.0µm) over Ni (1.27~8.89µm) Seam Yes Yes Seal Method Lead (Pb) Free RoHS Compliant Frequency Range (MHz) 8.000 ~ 9.999999 10.000 ~ 11.999999 12.000 ~ 15.999999 16.000 ~ 19.999999 20.000 ~ 24.999999 25.000 ~ 54.000 Operating Temperature 0°C ~ +50°C 0°C ~ +70°C -10°C ~+60°C -10°C ~+70°C -20°C ~+70°C -30°C ~+85°C -40°C ~+85°C -40°C ~+105°C -40°C ~+125°C -55°C ~+125°C DIMENSIONS / MECHANICAL SPECIFICATIONS Operating Mode Max ESR Ω Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 500 150 80 60 50 40 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. AVAILABLE OPERATING TEMPERATURES AND STABILITIES* ±5 PPM ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM ±50 PPM X O O O O O X O O O O O O O O O O O X O O O O O X O O O O O X X O O O O X X O O O O X X X X X X X X X X X X X X X X X X Key: O = Available, X = Not Available, N/A = Not applicable *Does not imply a stocked part. Revised C: 08/21/2022 Page 1 of 2 O O O O O O O O O O ±100 PPM N/A N/A N/A N/A N/A N/A N/A O O O www.foxonline.com FC3BS 3.2mm x 2.5mm Ceramic SMD Crystal (Former FX325BS) TAPE SPECIFICATIONS (mm) A B C D E F ø1.55 4.0 4.0 3.5 8.0 1.3 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø80 Ø180 9.0 2.0 Available Options & Part Identification for Crystal Model C3BS1 FC3BSBBGM25.0-T1 F C3BS B Fox Model Number Tolerance B = ±50 PPM C = ±30 PPM D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM B G Stability Load A = ±100 PPM Capacitance2 B = ±50 PPM V = 7pF C = ±30 PPM D = 8pF D = ±25 PPM W = 9pF E = ±20 PPM E = 10pF F = ±15 PPM G = 12PF H = ±10 PPM J = 15PF L = ±5 PPM K = 16PF L = 18pF M = 20pF M 25.0 -T1 Operating Temperature A = 0 to +50°C C = 0 to +70°C D = -10 to +60°C E = -10 to +70°C F = -20 to +70°C K = -30 to +85°C M = -40 to +85°C P = -40 to +105°C I = -40 to +125°C T = -55 to +125°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised C: 08/21/2022 Page 2 of 2 www.foxonline.com