FC6ASCCLF24.0-T2

FC6AS 6.0mm x 3.5mm Ceramic SMD Crystal (Former FQA) Features • • • Tolerances down to ±20 PPM Stabilities down to ±20 PPM Temperature Ranges to -40˚C to +85˚C STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year (@ 25°C) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish Seal Method Lead (Pb) Free RoHS Compliant MAX (Unless otherwise noted) DIMENSIONS / MECHANICAL SPECIFICATIONS 8.000 ~ 67.000 MHz (See options below) (See options below) (See options below) -40°C ~ +85°C 5 pF (See options below) 100µW ±5.0 PPM 260°C / 10 Seconds x 2 1 Au over Ni Resin Yes Yes Frequency Range (MHz) Operating Mode Max ESR Ω 8.000 ~ 8.999999 9.000 ~ 9.999999 10.000 ~ 16.000 16+ ~ 50.000 40.000 ~ 67.000 Fundamental Fundamental Fundamental Fundamental 3RD OT 150 80 60 40 70 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. AVAILABLE OPERATING TEMPERATURES AND STABILITIES* Operating Temperature 0°C ~ +70°C -10°C ~ +70°C -20°C ~ +70°C -30°C ~ +85°C 40°C ~ +85°C Revised A: 11/13/2019 ±20 PPM ±25 PPM O O O O O O X X X X Key: O = Available, X = Not Available Page 1 of 2 ±30 PPM O O O O O ±50 PPM O O O O O www.foxonline.com FC6AS 6.0mm x 3.5mm Ceramic SMD Crystal (Former FQA) TAPE SPECIFICATIONS (mm) A B ø1.5 4.0 C 8.0 D E 5.5 12.0 REEL SPECIFICATIONS (mm) F REEL QTY G H I J K L M 1.9 -T1 = 1,000 -T2 = 2,000 2.0 Ø13 Ø21 Ø80 Ø250 13.5 2.0 Available Options & Part Identification for Crystal Model C6AS1 Sample PN: FC6ASBBME12.0-T1 F C6AS Fox Model Number B B Tolerance Stability B = ±50 PPM A = ±100 PPM C = ±30 PPM B = ±50 PPM D = ±25 PPM C = ±30 PPM E = ±20 PPM D = ±25 PPM E = ±20 PPM M E 12.0 -T1 Load Capacitance2 B = 10pF G = 12pF U = 13pF K = 16pF L = 18pF M = 20pF Operating Temperature C = 0 ~ +70°C E = -10 ~ +70°C F = -20 ~ +70°C K = -30 ~ +85°C M = -40 ~ +85°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 11/13/2019 Page 2 of 2 www.foxonline.com