FC6BSCCNM14.7456-T1

FC6BS 6mm x 3.5mm Ceramic SMD Crystal (Former FMB) Features • • • Tolerances down to 10 PPM Stabilities down to 5 PPM Temperature Ranges as wide as -55˚C to +125˚C STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year (@ 25°C) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish Seal Method Lead (Pb) Free RoHS Compliant MAX (Unless otherwise noted) DIMENSIONS / MECHANICAL SPECIFICATIONS 7.3728 ~ 133.000 MHz (See options below) (See options below) (See options below) -55°C ~ +125°C 5.0 pF (See options below) 100µW ±5 PPM 260°C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Frequency Range (MHz) Operating Mode Max ESR Ω 7.3728 ~ 7.999999 8.000 ~ 9.999999 10.000 ~ 11.999999 12.000 ~ 19.999999 20.000 ~ 24.999999 25.000 ~ 200.000 40.000 ~ 51.999999 52.000 ~ 71.999999 72.000 ~ 133.000 Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 3RD OT 3RD OT 3RD OT 100 70 50 30 25 20 100 80 70 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. AVAILABLE OPERATING TEMPERATURES AND STABILITIES* Operating Temperature ±5 PPM ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM ±50 PPM 0°C ~ +70°C X O O O O O O -10°C ~ +60°C O O O O O O O -10°C ~ +70°C X O O O O O O -20°C ~ +70°C X O O O O O O -30°C ~ +85°C X X O O O O O -40°C ~ +85°C X X O O O O O -40°C ~ +105°C X X X X X X O -40°C ~ +125°C X X X X X X O -55°C ~ +125°C X X X X X X O Key: O = Available, X = Not Available, N/A=Not Applicable, *Does not imply a stocked part. Revised B: 7/21/2021 Page 1 of 2 ±100 PPM N/A N/A N/A N/A N/A N/A O O O www.foxonline.com FC6BS 6mm x 3.5mm Ceramic SMD Crystal (Former FMB) TAPE SPECIFICATIONS (mm) A B ø1.55 C 4.0 8.0 D E 5.5 12.0 REEL SPECIFICATIONS (mm) F REEL QTY G H I J K L M 1.8 -T1 = 1,000 -T2 = 2,000 2.0 Ø13 Ø21 Ø80 Ø178 13.5 2.0 Available Options & Part Identification for Ceramic SMD Crystal FC6BS1 Sample PN: FC6BSCCEM25.0-T1 F C6BS C C E M 25.0 -T1 Fox Model Number Tolerance B = ±50 PPM C = ±30 PPM D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM Stability B = ±50 PPM C = ±30 PPM D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM L = ±5 PPM Load Capacitance2 V = 7pF E = 10pF G = 12pF J = 15pF K = 16pF L = 18pF M = 20pF N = 22pF Operating Temperature C = 0 to +70°C D = -10 to +60°C E = -10 to +70°C F = -20 to +70°C K = -30 to +85°C M = -40 to +85°C P = -40 to +105°C I = -40 to +125°C T = -55 to +125°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised B: 7/21/2021 Page 2 of 2 www.foxonline.com