FC8AQCCMC4.9152-T1

FC8AQ 10mm x 4.5mm SMD Crystal (Former FQ1045A) Features • • • Tolerances down to 20 PPM Stabilities down to 20 PPM Temperature Ranges as wide to -40˚C to +85˚C STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year (@ 25°C) Termination Finish Seal Method Lead (Pb) Free RoHS Compliant Frequency Range (MHz) 3.200 ~ 7.000 MAX (Unless otherwise noted) DIMENSIONS / MECHANICAL SPECIFICATIONS 3.200 ~ 7.000 MHz (See options below) (See options below) (See options below) -40°C ~ +85°C 5 pF (See options below) 0.5 mW ±5 PPM Ag Resin Yes Yes Operating Mode Fundamental Max ESR Ω 150 AVAILABLE OPERATING TEMPERATURES AND STABILITIES* Operating Temperature ±20 PPM ±25 PPM ±30 PPM ±50 PPM 0°C ~+70°C O O O O -20°C ~+70°C O O O O -30°C ~+85°C X X X O -40°C ~+85°C X X X O Key: O = Available, X = Not Available, ∆=Consult Fox Technical Support Note: Dimensional drawing is for reference to critical *Does not imply a stocked part. specifications defined by size measurements. Revised B: 7/22/2021 Page 1 of 2 www.foxonline.com FC8AQ 10mm x 4.5mm SMD Crystal (Former FQ1045A) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M ø1.5 4.0 8.0 11.5 24.0 2.0 -T1 = 1,000 2.0 Ø13 Ø21 Ø100 Ø330 24.4 2.0 Available Options & Part Identification for SMD Crystal C8AQ1 Sample PN: FC8AQCCMC3.6864-T1 F C8AQ C C M C 3.6864 -T1 Fox Model Number Tolerance B = 50 PPM C = 30 PPM D = 25 PPM E = 20 PPM Stability B = 50 PPM C = 30 PPM D = 25 PPM E = 20 PPM Load Capacitance2 E = 10pF K = 16pF L = 18pF M = 20pF Operating Temperature C = 0 to +70°C F = -20 to +70°C K = -30 to +85°C M = -40 to +85°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised B: 7/22/2021 Page 2 of 2 www.foxonline.com