FC9SDCCLM14.7456-T1

FC9SD 13.5mm X 5.0mm Resistance Weld SMD Crystal (Former HC49SSDLF) Features • • • Tolerances down to ±10PPM Stabilities down to ±5PPM Temperature Ranges as wide to -55˚C to +125˚C STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year (@ 25°C) Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free RoHS Compliant Frequency Range (MHz) 4.000 ~ 5.000 >5.000 ~ 6.000 >6.000 ~ 7.000 >7.000 ~ 9.000 >9.000 ~ 13.000 >13.000 ~ 20.000 >20.000 ~ 40.000 24.000 ~ 70.000 >70.000 ~ 80.000 MAX (Unless otherwise noted) DIMENSIONS / MECHANICAL SPECIFICATIONS 4.000 ~ 80.000 MHz (See options below) (See options below) (See options below) -55°C ~ +125°C 7 pF (See options below) 0.5 mW (0.1 mW typical) ±3 PPM 260ºC / 10 Seconds x 2 Sn/Ag3/Cu0.5 Resistance Weld Yes Yes - No Exemptions Operating Mode Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 3rd OT 3rd OT Max ESR Ω 150 120 100 80 60 40 30 100 70 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. AVAILABLE OPERATING TEMPERATURES AND STABILITIES* Operating Temperature ±5 PPM ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM ±50 PPM ±100 PPM -10°C ~+60°C O O O O O O O O -20°C ~+70°C Δ O O O O O O O -40°C ~+85°C X X O O O O O O -40°C ~+105°C X X X X X Δ O O -40°C ~+125°C X X X X X X Δ O -55°C ~+125°C X X X X X X Δ O Key: O = Available, X = Not Available, ∆ = Consult Fox Technical Support, *Does not imply a stocked part. Revised C: 04/11/2022 Page 1 of 2 www.foxonline.com FC9SD 13.5mm X 5.0mm Resistance Weld SMD Crystal (Former HC49SSDLF) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M ø1.55 4.0 12.0 11.5 24.0 3.5 T1 = 1,000 2.0 Ø13 Ø21 Ø80 Ø330 25.5 2.0 Available Options & Part Identification for Resistance Weld SMD Crystal FC9SD1 Sample PN: FC9SDCBMF25.0-T1 F C9SD Fox Model Number C B Tolerance Stability B = ±50 PPM A = ±100 PPM C = ±30 PPM B = ±50 PPM D = ±25 PPM C = ±30 PPM E = ±20 PPM D = ±25 PPM F = ±15 PPM E = ±20 PPM H = ±10 PPM F = ±15 PPM H = ±10 PPM L = ±5 PPM M F 25.0 -T1 Load Capacitance2 A = Series E = 10pF G = 12pF J = 15pF K = 16Pf L = 18pF M = 20pF Q = 30pF Operating Temperature D = -10 to +60°C F = -20 to +70°C M = -40 to +85°C P = -40 to +105°C I = -40 to +125°C T = -55 to +125°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised C: 04/11/2022 Page 2 of 2 www.foxonline.com