FO1HSLBM50.0-T1

FO1HS 2.0mm x 1.6mm HCMOS SMD Oscillator (Former F110, F130, F140) Features • • • • HCMOS Output Stabilities to ±20 PPM Temperature Ranges as wide as -40°C to +125°C Supply Voltages: 1.8V, 2.5V, 3.3V, Variable (1.6V ~ 3.63V; 2.25V~3.63V) 1.8V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Temperature Range Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.25 ~ 10.0MHz >10.0 ~ 20.0MHz >20.0 ~ 30.0MHz >30.0 ~ 40.0MHz >40.0 ~ 60.0MHz >60.0 ~ 100.0MHz >100.0 ~ 133.0MHz Standby Current Output Symmetry (50% VDD) 1.25 ~ 50.0 MHz >50.0 MHz Rise/Fall Time (10%/90% VDD Levels) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (Unless otherwise noted) 1.25 ~ 133.0 MHz -55°C ~ +125°C 1.8V±5% 2.5 mA 3.5 mA 4.0 mA 4.5 mA 6.0 mA 10.0 mA 20.0 mA 10µA 45 % ~ 55 % 40% ~ 60% 10 nS 10 % VDD 90 % VDD Min 15 pF 10 mS 10 µS 10 mS ENABLE / DISABLE FUNCTION1 Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp for 1.8V Frequency Stability ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 Operating Temperature (°C) -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 Frequency Range (MHz) 1.25 ~ 133.0 1.25 ~ 133.0 1.25 ~ 133.0 1.25 ~ 133.0 1.25 ~ 133.0 1.25 ~ 133.0 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, one year aging, shock, and vibration. 3 Inclusive of 25°C tolerance and operating temperature range. 1 2 Revised G: 12/17/2020 Page 1 of 7 www.foxonline.com FO1HS 2.0mm x 1.6mm HCMOS SMD Oscillator (Former F110, F130, F140) 2.5V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Temperature Range Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.25 ~ 19.999999MHz 20.0 ~ 39.999999MHz 40.0 ~ 50.0MHz >50.0 ~ 170MHz Standby Current Output Symmetry (50% VDD) 1.25 ~ 50.0 MHz >50.0 MHz Rise/Fall Time (10%/90% VDD Levels) (TR/TF) MAX (Unless otherwise noted) 1.25 ~ 170.0 MHz Output Voltage 10 % VDD 90 % VDD Min 15 pF 10 mS 200 nS 10 mS (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 -55°C ~ +150°C 2.5V±10% 5 mA 9 mA 11 mA 30 mA 10µA 45 % ~ 55 % 40 % ~ 60 % 10nS ENABLE / DISABLE FUNCTION1 Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp for 2.5V Frequency Stability2 ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 Operating Temperature (°C) -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 Frequency Range (MHz) 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, one year aging, shock, and vibration. 3 Inclusive of 25°C tolerance and operating temperature range. 1 2 Revised G: 12/17/2020 Page 2 of 7 www.foxonline.com FO1HS 2.0mm x 1.6mm HCMOS SMD Oscillator (Former F110, F130, F140) 3.3V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Temperature Range Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.25 ~ 19.999999MHz 20.0 ~ 39.999999MHz 40.0 ~ 50.0 MHz >50.0 ~ 170.0 MHz Standby Current Output Symmetry (50% VDD) 1.25 ~ 50.0 MHz MAX (Unless otherwise noted) 1.25 ~ 170.0MHz >50.0 MHz 40% ~ 60% Rise/Fall Time (10%/90% VDD Levels) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 Aging (per year @ 25˚C) 10 nS 10 % VDD 90 % VDD Min 15 pF 10 mS 200 nS 10 mS ±5 PPM -55°C ~ +125°C 3.3V±5% 7 mA 13 mA 19 mA 40 mA 10µA 45% ~ 55% ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp for 3.3V Frequency Stability ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 Operating Temperature (°C) -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 Frequency Range (MHz) 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 1.25 ~ 170.0 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, one year aging, shock, and vibration. 3 Inclusive of 25°C tolerance and operating temperature range. 1 2 Revised G: 12/17/2020 Page 3 of 7 www.foxonline.com FO1HS 2.0mm x 1.6mm HCMOS SMD Oscillator (Former F110, F130, F140) VARIABLE VOLTAGE ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Temperature Range Storage (TSTG) Supply Voltage (VDD) 0.75 ~ 135. MHz >135.0 ~ 156.25MHz Input Current (IDD) 0.75 ~ 19.999MHz 20.0 ~ 39.999MHz 40.0 ~ 59.999MHz 60.0 ~ 84.999MHz 85.0 ~ 135.0MHz >135.0 ~ 156.250MHz Standby Current TOPR= -40 ~ +85°C TOPR= -40 ~ +105°C / -40 ~ +125°C Output Symmetry (50% VDD) 0.75 ~ 80MHz 80.0 ~ 135 MHz Rise/Fall Time (10%/90% VDD Levels) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (Unless otherwise noted) 0.75 ~ 156.25 MHz -55°C ~ +125°C 1.6V ~ 3.63V 2.25V ~ 3.63V 4 mA 6 mA 10 mA 15 mA 30 mA 40 mA 10 µA 20 µA 45 % ~ 55 % 40 % ~ 60 % 6 nS 10 % VDD 90 % VDD Min 15 pF 5 mS 200nS 5 mS ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Revised G: 12/17/2020 Output (pin 3) Active Active High Z Page 4 of 7 www.foxonline.com FO1HS (Former F110, F130, F140) 2.0mm x 1.6mm HCMOS SMD Oscillator Available Options by Stability & Operating Temp For Variable Voltage Frequency Stability ±100PPM2 ±100PPM2 ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 ±20PPM3 Operating Temperature (°C) -20 ~ +70 -40 ~ +85 -40 ~ +105 -40 ~ +125 -20 ~ +70 -40 ~ +85 -40 ~ +105 -40 ~ +125 -20 ~ +70 -40 ~ +85 -20 ~ +70 Frequency Range (MHz) 0.75 ~ 156.25 0.75 ~ 156.25 1.25 ~ 135.0 1.25 ~ 135.0 0.75 ~ 156.25 0.75 ~ 156.25 1.25 ~ 135.0 1.25 ~ 135.0 0.75 ~ 156.25 0.75 ~ 156.25 0.75 ~ 156.25 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, one year aging, shock, and vibration. 2 Inclusive of 25°C tolerance and operating temperature range. 1 2 Revised G: 12/17/2020 Page 5 of 7 www.foxonline.com FO1HS 2.0mm x 1.6mm HCMOS SMD Oscillator (Former F110, F130, F140) DIMENSIONS / MECHANICAL SPECIFICATIONS ` Note: 1, A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise. 2, Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free RoHS Compliant REACH Compliant (latest version) Revised G: 12/17/2020 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 N/A Au (0.3~1µm) over Ni (1.27~8.89µm) Seam Yes Yes, no exemptions Yes Page 6 of 7 www.foxonline.com FO1HS 2.0mm x 1.6mm HCMOS SMD Oscillator (Former F110, F130, F140) TAPE SPECIFICATIONS (mm) A B C D E F ø1.55 4.0 4.0 3.5 8.0 1.15 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.7 Available Options & Part Identification* Sample PN: FO1HSCBM25.0-T3 F O1HS C B M 25.0 -T3 Fox Model Number Voltage L = 1.8V±10% J = 2.5V±10% C = 3.3V±10% V = 1.6V to 3.63V W = 2.25V to 3.63V Stability A = ±100 PPM B = ±50 PPM D = ±25 PPM E = ±20 PPM Operating Temperature F = -20 to +70ºC M = -40 to +85°C I = -40 to +125ºC P = -40 to +105˚C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised G: 12/17/2020 Page 7 of 7 www.foxonline.com