FO3LSCDF200.0-T1

3.2mm x 2.5mm SMD LVDS Oscillator FO3LS Features • • • • LVDS Output Stabilities to ±20 PPM Operating Temperature Ranges to -40°C to +85°C Supply Voltages: 2.5V, 3.3V PARAMETERS Frequency Range Temperature Range Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) Standby Current Output Symmetry (50% VP-P) Rise Time (20%~80% VP-P) Fall Time (80%~20% VP-P) Differential Output Voltage (VOD) Differential Offset Voltage (VOS) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 Aging (per year @ 25C) Phase Jitter (12kHz~20MHz) 2.5V SPECIFICATIONS MAX (Unless otherwise noted) 13.5 ~ 250MHz -55°C ~ +125°C 2.5V±10% 50mA 15 µA 45 % ~ 55 % 500pS 500pS 0.247V ~ 0.454V 1.125V ~ 1.375V 100 Ohms Typical 10 mS 200 µS 10 mS ±3PPM 1pS 3.3V±10% ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Out 1 (pin 4), Out 2 (pin 5) Active Active High Z Available Options by Stability & Operating Temp Frequency Stability2 ±100PPM ±100PPM ±50PPM ±50PPM ±25PPM ±25PPM3 ±20PPM3 Operating Temperature (°C) -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 -20 ~ +70 Frequency Range (MHz) 13.500 ~ 250.000 13.500 ~ 250.000 13.500 ~ 250.000 13.500 ~ 250.000 13.500 ~ 250.000 13.500 ~ 250.000 13.500 ~ 250.000 An internal pull-up resistor from pin 1 to pin 6 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Shock, vibration, reflow, and one-year aging. 3 Inclusive of 25°C tolerance and operating temperature range. 1 2 Revised A: 10/07/2019 Page 1 of 3 www.foxonline.com 3.2mm x 2.5mm SMD LVDS Oscillator FO3LS DIMENSIONS / MECHANICAL SPECIFICATIONS ` Note: 1, A 0.01μF capacitor should be placed between VDD (Pin 6) and GND (Pin3) to minimize power supply line noise. 2, Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free ROHS/REACH Compliant Revised A: 10/07/2019 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Page 2 of 3 www.foxonline.com 3.2mm x 2.5mm SMD LVDS Oscillator FO3LS TAPE SPECIFICATIONS (mm) A B ø1.5 4.0 C 4.0 D E 3.5 8.0 REEL SPECIFICATIONS (mm) F REEL QTY G H I J K L M 1.4 -T1 = 1,000 -T3 = 3,000 2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.2 Available Options & Part Identification for SMD LVDS Oscillator O3LS* Sample PN: FO3LSCDM125.0-T1 F O3LS C D M 125.0 -T1 Fox Model Number Voltage J = 2.5V±10% C = 3.3V±10% Stability A = ±100 PPM B = ±50 PPM D = ±25 PPM E = ±20 PPM Operating Temperature F = -20 to +70°C M = -40 to +85°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T3 = 3,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 10/07/2019 Page 1 of 3 www.foxonline.com