FO5PSCDM16.0-BULK

FO5PS 5mm x 3.2mm LVPECL SMD Oscillator (Former F530P/F540P) Features • • • LV-PECL Temperature Ranges from -40°C to +85°C Supply Voltages: 3.3V; 2.5V ELECTRICAL CHARACTERISTICS PARAMETERS Supply Voltage (VDD) Frequency Range (FO) Temperature Range Storage (TSTG) Input Current (IDD) Standby Current (IST) Output Symmetry (50% VP-P) 13.5 ~ 156.25MHz >156.25MHz Rise Time (20% ~80% Vp-p Levels) (TR) MAX (Unless otherwise noted) 3.3V±5% 2.5V±5% 13.5 ~ 325MHz 13.5 ~ 250MHz Fall Time (80% ~ 20% Vp-p Levels) (TF) 1 nS Output Voltage (VOL) (VOH) Output Load Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 Phase Jitter, RMS (12kHz to 20MHz BW) -55°C ~ +125°C 88 mA 30µA 45 % ~ 55 % 40 % ~ 60 % 1 nS 1.68V 1.095V 2.275V Min 1.475V Min 50 Ohms to Vdd-2.0V 10 mS 200 nS 10 mS 1 pS ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 80%VDD ‘0’ Level VIL ≤ 20%VDD Out 1 (pin 4), Out 2 (pin 5) Active Active High Z Available Options by Stability & Operating Temp Frequency Stability ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 Operating Temperature (°C) -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, one-year aging, shock, and vibration. 3 Inclusive of 25°C tolerance and operating temperature range. 1 2 Revised A: 08/29/2019 Page 1 of 3 www.foxonline.com FO5PS 5mm x 3.2mm LVPECL SMD Oscillator (Former F530P/F540P) DIMENSIONS / MECHANICAL SPECIFICATIONS ` Note: 1, A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise. 2, Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free ROHS/REACH Compliant (latest version) Revised A: 08/29/2019 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 1 Au (0.3~1µm) over Ni (1.27~8.89µm) Seam Yes Yes Page 2 of 3 www.foxonline.com FO5PS 5mm x 3.2mm LVPECL SMD Oscillator (Former F530P/F540P) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M ø1.55 4.0 8.0 5.5 16.0 1.4 -T1 = 1,000 2.0 Ø13 Ø21 Ø60 Ø180 13.0 2.0 Available Options & Part Identification* Sample PN: FO5PSCBM125.0-T1 F O5PS C B M 125.0 -T1 Fox Model Number Voltage C = 3.3V±5% H = 2.5V±5% Stability A = ±100 PPM B = ±50 PPM D = ±25 PPM Operating Temperature F = -20 to +70˚C M = -40 to +85˚C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs *Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 08/29/2019 Page 3 of 3 www.foxonline.com