FO5SLCBP100.0-T1

FO5SL 5.0mm x 3.2mm SMD HCSL Oscillator (Former F530SL Series) Features • • • • HCSL Differential Output Stabilities to ±25 PPM Temperature Ranges as wide as -40ºC to +105ºC Supply Voltage: 3.3V PARAMETERS Frequency Range (Fo) Temperature Range Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) Standby Current Output Symmetry (50% VP-P) Rise Time (20%~80% VP-P) (TR/TF) 13.500 ~ 99.999999 MHz 100.0 ~ 160.000 MHz Output Voltage (VOL) (VOH) Output Swing (VOPP) Output Load Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 Aging (per year @ 25C) Phase Jitter (12kHz~20MHz) 1 SPECIFICATIONS MAX (Unless otherwise noted) 13.5 ~ 160MHz -55°C ~ +125°C 3.3V±10% 40 mA 10 µA 45 % ~ 55 % 1.0 nS 0.7 nS -0.15V ~ 0.15V 0.55V ~ 0.85V 0.65V Min 50 Ohms to GND 10 mS 200 nS 10 mS ±3 PPM 1 pS RMS An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Out 1 (pin 4), Out 2 (pin 5) Active Active High Z Available Options by Stability & Operating Temp Frequency Stability ±100PPM2 ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 Operating Temperature (°C) -20 ~ +70 -40 ~ +85 -40 ~ +105 -20 ~ +70 -40 ~ +85 -40 ~ +105 -20 ~ +70 -40 ~ +85 Frequency Range (MHz) 13.500 ~ 160.000 13.500 ~ 160.000 13.500 ~ 160.000 13.500 ~ 160.000 13.500 ~ 160.000 13.500 ~ 160.000 13.500 ~ 160.000 13.500 ~ 160.000 2 Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, shock, vibration, reflow, and one-year aging. 3 Inclusive of 25C tolerance and operating temperature range Revised A: 05/06/2020 Page 2 of 7 www.foxonline.com FO5SL 5.0mm x 3.2mm SMD HCSL Oscillator (Former F530SL Series) DIMENSIONS / MECHANICAL SPECIFICATIONS Note: 1. A 0.01μF capacitor should be placed between VDD (Pin 6) and GND (Pin3) to minimize power supply line noise. 2. Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, pin shape etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free REACH/REACH Compliant Revised A: 05/06/2020 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Page 3 of 7 www.foxonline.com FO5SL 5.0mm x 3.2mm SMD HCSL Oscillator (Former F530SL Series) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M ø1.5 4.0 8.0 5.5 12.0 1.5 -T1 = 1,000 2.0 Ø13 Ø21 Ø60 Ø180 13.0 2.0 Available Options & Part Identification for SMD LVDS Oscillator O5SL* Sample PN: FO5SLCBF125.0 -T1 F O5SL C B F 125.0 -T1 Fox Model Number Voltage C = 3.3V±10% Stability A = ±100 PPM B = ±50 PPM D = ±25 PPM Operating Temperature F = -20 to +70°C M = -40 to +85°C P = -40 to +105°C Frequency (MHz) Reel Quantity Blank = Bulk T1 = 1,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 05/06/2020 Page 4 of 7 www.foxonline.com