FO6HSCBM3.6864-T1

FO6HS 6mm x 3.5mm HCMOS SMD Oscillator (Former F4200) Features • • • • HCMOS Output Stabilities to ±100 PPM Temperature Ranges as wide as -40°C to +85°C Supply Voltages: 3.3V 3.3V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Temperature Range Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) Standby Current Output Symmetry (50% VDD) Rise/Fall Time (10%/90% VDD Levels) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (Unless otherwise noted) 1.544 ~ 50.000 MHz -55°C ~ +125°C 3.3V±10% 20 mA 10µA 40 % ~ 60 % 6 nS 10 % VDD 90 % VDD Min 15 pF 10 mS 150 nS 10 mS ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp2 Frequency Stability2 ±100PPM ±100PPM ±50PPM ±50PPM ±25PPM ±25PPM ±20PPM* 1 2 Operating Temperature (°C) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 Frequency Range (MHz) 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, shock, vibration, reflow, and One-year aging. Revised A: 06/24/2019 Page 1 of 3 www.foxonline.com FO6HS 6mm x 3.5mm HCMOS SMD Oscillator (Former F4200) DIMENSIONS / MECHANICAL SPECIFICATIONS ` 6.0±0.2 #4 #3 3.5±0.2 #1 #2 1.4±0.1 2.54 #2 #4 #3 1.5 #1 1.0 Recommended Solder Pad Layout 1.1 1.4 1.1 1.4 Note: 1, A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise. 2, Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free RoHS /REACH Compliant Revised A: 06/24/2019 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 1 Au (0.3~1µm) over Ni (1.27~8.89µm) Seam Yes Yes Page 2 of 3 www.foxonline.com FO6HS 6mm x 3.5mm HCMOS SMD Oscillator (Former F4200) TAPE SPECIFICATIONS (mm) A B ø1.5 4.0 C 8.0 D E 5.5 12 REEL SPECIFICATIONS (mm) F REEL QTY G H I J K L M 1.9 -T2 = 2,000 -T1 = 1,000 2.0 Ø13 Ø21 Ø80 Ø255 13.5 2.0 Available Options & Part Identification* Sample PN: FO6HSCBE25.0-T2 F O6HS C B E 25.0 -T2 Fox Model Number Voltage B = 3.3V±5% Stability A = 100 PPM B = 50 PPM D = 25 PPM E = 20 PPM Operating Temperature E = -10 to +70˚C M = -40 to +85˚C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 06/24/2019 Page 3 of 3 www.foxonline.com