FO7HBAAE40.0-T1

FO7HB 7mm x 5mm HCMOS SMD Oscillator (Former F4101 Series) Features • • • • Standby Enable Disable Stabilities to ±20 PPM Temperature Ranges to -40°C to +85°C Supply Voltage: 5.0V 5.0V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 0.012 ~ 32.000MHz 32.000+ ~ 67.000MHz 67.000+ ~ 125.000MHz 125.000+ ~ 170.000MHz Standby Current Output Symmetry (50% VDD) Rise/Fall Time (10%/90% VDD Levels) (TR/TF) 0.012 ~ 79.999999MHz > 80.000 ~ 170.000MHz Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (Unless otherwise noted) 0.012 ~ 170.000MHz -55 ~ +125°C 5.0V±10% 18mA 50mA 80mA 90mA 10µA 40% ~ 60% 5nS 4nS 10% VDD 90% VDD Min 15pF 10mS 150nS 10mS ENABLE / DISABLE FUNCTION Pin OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD 1 Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp for 5.0V Frequency Stability ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 ±25PPM3 Operating Temperature (°C) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 Frequency Range (MHz) 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 162.000 0.012 ~ 156.000 0.012 ~ 162.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, and one-year aging. 3 Inclusive of 25°C tolerance and operating temperature rang. 2 Revised A: 08/14/2019 Page 1 of 3 www.foxonline.com FO7HB 7mm x 5mm HCMOS SMD Oscillator (Former F4101 Series) DIMENSIONS / MECHANICAL SPECIFICATIONS Note: *A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise. *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level Termination Finish Seal Method Lead (Pb) Free ROHS/REACH Compliant Revised A: 08/14/2019 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 1 Au (0.3~1µm) over Ni (1.27~8.89µm) Seam Yes Yes Page 2 of 3 www.foxonline.com FO7HB 7mm x 5mm HCMOS SMD Oscillator (Former F4101 Series) TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 8.0 7.5 16.0 2.15 REEL SPECIFICATIONS (mm) REEL QTY -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø80 Ø255 17.5 2.0 Available Options & Part Identification for HCMOS SMD Oscillator O7HB* Sample PN: FO7HBABM25.0-T2 F O7HB A B M 25.0 -T2 Fox Model Number Voltage A = 5V±10% Stability A = ±100 PPM B = ±50 PPM D = ±25 PPM E = ±20 PPM Operating Temperature E = -10 to +70ºC M = -40 to +85°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 08/14/2019 Page 3 of 3 www.foxonline.com