FO7HSCAM10.0-T2

FO7HS (Former F4500, F4400, F4100 Series) 7mm x 5mm HCMOS SMD Oscillator Features • • • • HCMOS Output Stabilities to ±20 PPM Temperature Ranges to -40°C to +85°C Supply Voltage: 1.8V, 2.5V, 3.3V 1.8V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 0.012 ~ 32.000MHz >32.000 ~ 70.000MHz >70.000 ~ 120.000MHz >120.000 ~ 160.000MHz Standby Current Output Symmetry (50% VDD) Rise/Fall Time (20%/80% VDD Levels) (TR/TF) 0.012 ~ 32.000MHz >32.000 ~ 120.000MHz >120.000 ~ 160.000MHz Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 Revised C: 07/29/2020 MAX (Unless otherwise noted) 0.012 ~ 160.000MHz -55 ~ +125°C 1.8V±5% 5 mA 10 mA 15 mA 30 mA 10 µA 40% ~ 60% 5.0 nS 3.5 nS 3.0 nS 20% VDD 80% VDD Min 15pF 10 mS 300 nS 10 mS Page 1 of 6 www.foxonline.com FO7HS (Former F4500, F4400, F4100 Series) 7mm x 5mm HCMOS SMD Oscillator ENABLE / DISABLE FUNCTION Pin OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD 1 Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp for 1.8V Frequency Stability ±100PPM2 ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM2 ±25PPM3 ±20PPM3 ±20PPM3 Operating Temperature (°C) -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 Frequency Range (MHz) 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 0.012 ~ 160.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, and one-year aging. 3 Inclusive of 25°C tolerance and operating temperature rang. 2 Revised C: 07/29/2020 Page 2 of 6 www.foxonline.com FO7HS 7mm x 5mm HCMOS SMD Oscillator (Former F4500, F4400, F4100 Series) 2.5V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 0.012 ~ 32.000MHz >32.000 ~ 50.000MHz >50.000 ~ 125.000MHz >125.000 ~ 160.000MHz >160.000 ~ 170.000MHz Standby Current Output Symmetry (50% VDD) 0.012 ~ 50.000MHz >50.000 ~ 200.000MHz Rise/Fall Time (10%/90% VDD Levels) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (Unless otherwise noted) 0.012 ~ 170.000MHz -55 ~ +125°C 2.5V±5% 7 mA 12 mA 26 mA 35 mA 40 mA 10 µA 45% ~ 55% 40% ~ 60% 5 nS 10% VDD 90% VDD Min 15pF 10 mS 150 nS 10 mS ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp for 2.5V Frequency Stability ±100PPM2 ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM2 ±25PPM3 ±20PPM3 ±20PPM3 Operating Temperature (°C) -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 Frequency Range (MHz) 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, and one-year aging. 3 Inclusive of 25°C tolerance and operating temperature rang. 2 Revised C: 07/29/2020 Page 3 of 6 www.foxonline.com FO7HS 7mm x 5mm HCMOS SMD Oscillator (Former F4500, F4400, F4100 Series) 3.3V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 0.012 ~ 0.040MHz >0.040 ~ 1.500MHz >1.500 ~ 32.000MHz >32.000 ~ 50.000MHz >50.000 ~ 67.000MHz >67.000 ~ 170.000MHz Standby Current Output Symmetry (50% VDD) 0.012 ~ 50.000MHz >50.000 ~ 170.000MHz Rise/Fall Time (10%/90% VDD Levels) (TR/TF) 0.012 ~ 80.000MHz >80.000 ~ 125.000MHz >125.000 ~ 170.000MHz Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (Unless otherwise noted) 0.012 ~ 170.000MHz -55 ~ +125°C 3.3V±10% 3 mA 6 mA 15 mA 20 mA 25 mA 40 mA 10 µA 45% ~ 55% 40% ~ 60% 6 nS 4 nS 3 nS 10% VDD 90% VDD Min 15pF 10 mS 150 nS 10 mS ENABLE / DISABLE FUNCTION Pin OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD 1 Output (pin 3) Active Active High Z Available Options by Stability & Operating Temp for 3.3V Frequency Stability ±100PPM2 ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM2 ±25PPM3 ±20PPM3 ±20PPM3 Operating Temperature (°C) -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 Frequency Range (MHz) 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, Reflow, and one-year aging. 3 Inclusive of 25°C tolerance and operating temperature rang. 2 Revised C: 07/29/2020 Page 4 of 6 www.foxonline.com FO7HS (Former F4500, F4400, F4100 Series) 7mm x 5mm HCMOS SMD Oscillator DIMENSIONS / MECHANICAL SPECIFICATIONS Note: *A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise. *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish Seal Method Lead (Pb) Free RoHS Compliant RERACH Compliant (latest version) Revised C: 07/29/2020 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 N/A Au (0.3~1µm) over Ni (1.27~8.89µm) Seam Yes Yes, no exemptions Yes Page 5 of 6 www.foxonline.com FO7HS (Former F4500, F4400, F4100 Series) 7mm x 5mm HCMOS SMD Oscillator TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 8.0 7.5 16.0 2.15 REEL SPECIFICATIONS (mm) REEL QTY -T1 = 1,000 -T2 = 2,000 G H I J K L M 2.0 Ø13 Ø21 Ø80 Ø255 17.5 2.0 Available Options & Part Identification for HCMOS SMD Oscillator O7HS* Sample PN: FO7HSCBM25.0-T2 F O7HS C B M 25.0 -T2 Fox Model Number Voltage K = 1.8V±5% H = 2.5V±5% C = 3.3V±10% Stability A = ±100PPM B = ±50PPM D = ±25PPM E = ±20PPM Operating Temperature E = -10 to +70°C F = -20 to +70°C M = -40 to +85°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised C: 07/29/2020 Page 6 of 6 www.foxonline.com