FOX914

3.0V ULTRA MINIATURE SMD TCXO/VCTCXO MODEL: FOX914 SERIES FEATURES • • • • • OPTIONS 3.0V Operation • Voltage Control (FOX914E) 1.5mm Height Max • Voltages of 2.8V ~ 3.3V Clipped Sine Output Low Cost Tape and Reel (2,000 pcs. STD) • PART NUMBER SELECTION Learn More - Internet Required Frequency Operating Frequency Model Part Number Stability Temperature (ºC) Range (MHz)1 Number -20 ~ +75 490-Frequency-xxxxx FOX914B See table 8.000 ~ 35.000 -20 ~ +75 491-Frequency-xxxxx FOX914E See table 8.000 ~ 35.000 Learn more about: Part Marking Identification Tape and Reel Specification Internet required • ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Temperature Range Operating (TOPR)3 Storage (TSTG) Supply Voltage (VDD)4 Input Current (IDD) Initial Frequency Tolerance (@ 25ºC ± 2ºC) (Vc = 1.5V2) Frequency Stability Over Temperature Range3 Over Supply Voltage Change (3.0V ± 5%) Over Load Change (10kΩ ± 10% // 10pF ±10%) Output Waveform (Clipped Sine) Peak-to-Peak Level (Vp-p) Output Load Aging per year Pullability2 (Vc = 1.5 ± 1.0V) 1 2 MAX (unless otherwise noted) 8.000 ~ 35.000 MHz1 -20ºC ~ +75ºC -40ºC ~ +85ºC 3.0V ± 5% 2.0mA ±1.0PPM ±2.5PPM ±0.2PPM ±0.2PPM 0.8V Min 10kΩ // 10pF ±1.0PPM ±5.0 ~ ±15.0 PPM Undeveloped frequencies available on an inquiry basis. For proper operation, a control voltage (Vc) must be applied to pin 1 on VCTCXOs. 3 Other stabilities/temperature ranges available. 4 Other voltages available. RoHS Compliance Status: Compliant All specifications subject to change without notice. Rev. 11/11/04 • DEVELOPED FREQUENCIES1 12.600 MHz 12.800 MHz 13.000 MHz 13.824 MHz 14.400 MHz 14.850 MHz 16.800 MHz 19.200 MHz 19.440 MHz 19.680 MHz 19.800 MHz 20.000 MHz 26.000 MHz 3 All dimensions are in millimeters. FOX Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com © 2004 FOX ELECTRONICS 85