FT1CNKTK38.4-T3

2.0mm x 1.6mm TCXO FT1CN Features • Analog Temperature Compensation STANDARD SPECIFICATIONS PARAMETERS Frequency Range (FO) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) 8.0 ~ 32.0MHz >32.0 ~ 52.0MHz Initial Frequency Tolerance @ 25°C (after reflow) Frequency Stability Over Temperature Range Over Supply Voltage Change (VDD±5%) Over Load Change [10kΩ//10pF]+-10% Output Waveform (Clipped Sine) Peak-to-Peak Level (Vp-p) Output Load Pullability (VCTCXO)2 VDD = 1.8V: Vc = 0.9V±0.8V VDD = 3.0V: Vc = 1.5V±1.5V Aging per year Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish DIMENSIONS / MECHANICAL SPECIFICATIONS MAX (Unless otherwise noted) 8.000 ~ 52.000MHz -30°C ~ +85°C -40°C ~ +85°C 1.8V±5% ~ 3.0V±5%1 ( See options below) 1.5 mA 2.0 mA ±2 PPM See options below ±0.1 PPM ±0.1 PPM 0.8V min (10kΩ//10pF)±10% TCXO #1 GND #2 GND ±8 ~ ±13 PPM nom ±1.0 PPM 260˚C / 10 Seconds x 2 1 Au over Ni #3 Output #4 VDD Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, etc. may vary. TCXO is operable from 1.7V to 3.3V. Note: A DC-Cut capacitor (1000pF) should be connected to the output. 1 Revised A: 05/14/2020 Page 1 of 2 www.foxonline.com 2.0mm x 1.6mm TCXO FT1CN TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 4.0 3.5 8.0 1.4 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.4 Available Options & Part Identification Sample PN: FT1CNKRK38.4-T3 F Fox T1CV Model Number T1CN = TCXO K R Tolerance Stability K = 1.8V±5% D = 3.0V±5% R = ±2.0PPM P = ±2.5PPM K Operating Temperature K = -30 to +85°C 38.4 Frequency (MHz) -T3 Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 05/14/2020 Page 2 of 2 www.foxonline.com