FT2CNKTK38.4-T3

FT2CV 2.5mm x 2.0mm SCW VCTCXO (Former FOX251) Features • • Analog Temperature Compensation Enable/Disable - Standby STANDARD SPECIFICATIONS PARAMETERS Frequency Range (MHz) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) (±5%) Input Current (IDD) Initial Frequency Tolerance @ 25°C (1hr after reflow) Frequency Stability Over Temperature Range Over Supply Voltage Change (VDD±5%) Over Load Change (15pF+-10%) Output Voltage Level Output Load Aging per year Startup Time (TS) Phase Noise @ 1kHz offset Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead-Free RoHS/REACH Compliant DIMENSIONS / MECHANICAL SPECIFICATIONS MAX (Unless otherwise noted) 8.0 ~ 52.000 See table below -40°C ~ +125°C 1.8V; 2.5V; 2.7V; 2.8V; 3.0V; 3.3V 2mA ±2.0 PPM See table below ±0.2 PPM ±0.2 PPM 0.8Vp-p min [10kΩ//10pF]+-10% ±1.0 PPM 2.0 mS -130 dBc/Hz Typical 260˚C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Available Options by Stability & Operating Temp Operating Temperature ±1 PPM ±1.5 PPM ±2 PPM ±2.5 PPM -30 ~+85˚C O O O -40 ~+85˚C X X O Key: O = Available, X = Not Available O O *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary *All specifications subject to change without notice. Note: A ≥1nF (10nF recommended) DC-Cut capacitor shall be connected to the output. Revised A: 09/04/2019 Page 1 of 2 www.foxonline.com FT2CV 2.5mm x 2.0mm SCW VCTCXO (Former FOX251) TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 4.0 3.5 8.0 1.4 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø20.2 Ø60 Ø180 9.0 1.4 Available Options & Part Identification for TCXO Model T2CN1 Sample PN: FT2CVBPK26.0-T3 F Fox 1 T2CV Model Number T2CV = VCTCXO B Tolerance B = +3.3V±5% D = +3.0V±5% Q = +2.8V±5% S = +2.7V±5% H = +2.5V±5% K = +1.8V±5% P Stability T = ±1.0 PPM S = ±1.5 PPM R = ±2.0 PPM P = ±2.5 PPM K Operating Temperature K = -30 to +85˚C M = -40 to +85˚C 26.0 Frequency (MHz) -T3 Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs Not all frequencies in the frequency range available. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 09/04/2019 Page 2 of 2 www.foxonline.com