FT2GNDUK26.0-T3

FT2GN 2.5mm x 2.0mm GPS TCXO (Former FOX251) Features • • Analog Temperature Compensation Enable/Disable - Standby STANDARD SPECIFICATIONS PARAMETERS Frequency Range (MHz) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) (±5%) Input Current (IDD) 8 ~ 32MHz >32 ~ 52MHz Initial Frequency Tolerance @ 25°C (after reflow) Frequency Stability Over Temperature Range Over Supply Voltage Change (VDD±5%) Over Load Change (15pF+-10%) Frequency Slope -30ºC ~ +85ºC -20ºC ~ +65ºC Output Voltage Level Output Load Aging per year Startup Time (TS) Phase Noise @ 1kHz offset Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead-Free RoHS/REACH Compliant MAX (Unless otherwise noted) 8.0 ~ 52.000 -30°C ~ +85°C -40°C ~ +85°C 1.8V; 3.0V 1.5mA 2mA ±2.0 PPM ±0.5 PPM ±0.1 PPM ±0.1 PPM ±0.1PPM/ºC ±0.05PPM/ºC 0.8Vp-p min [10kΩ//10pF]+-10% ±1.0 PPM 2.0 mS -130 dBc/Hz Typical 260˚C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Note: A ≥1nF (10nF recommended) DC-Cut capacitor shall be connected to the output. Revised A: 10/31/2019 DIMENSIONS / MECHANICAL SPECIFICATIONS Page 1 of 2 *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary *All specifications subject to change without notice. www.foxonline.com FT2GN 2.5mm x 2.0mm GPS TCXO (Former FOX251) TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 4.0 3.5 8.0 1.4 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø20.2 Ø60 Ø180 9.0 1.4 Available Options & Part Identification for TCXO Model T2CN1 Sample PN: FT2GNDUK26.0-T3 F Fox 1 T2CN Model Number T2GN = TCXO D Tolerance D = +3.0V±5% K = +1.8V±5% U Stability U = ±0.5 PPM Not all frequencies in the frequency range available. K Operating Temperature K = -30 to +85˚C M = -40 to +85˚C 26.0 Frequency (MHz) -T3 Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 10/31/2019 Page 2 of 2 www.foxonline.com