FT3CNDPK32.0-T3

FT3CN 3.2mm x 2.5mm CSW TCXO (Former FOX923) Features • Digital Temperature Compensation STANDARD SPECIFICATIONS PARAMETERS Frequency Range (MHz) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) (±5%) Input Current (IDD) Initial Frequency Tolerance @ 25°C (after reflow) (T3CV: Vc = 0.5VDD)1 Frequency Stability Over Temperature Range Over Supply Voltage Change (VDD±5%) Over Load Change [10kΩ//10pF]+-10% Output Voltage Level Output Load Pullability (T3CV: Vc = 0.5VDD ±1.0V)1 Aging per year Startup Time (TS) Phase Noise @ 1kHz offset Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish Lead-Free RoHS/REACH Compliant MAX (Unless otherwise noted) 8.0 ~ 40.000 DIMENSIONS / MECHANICAL SPECIFICATIONS (See table below) -40°C ~ +85°C 2.5V; 2.7V; 2.8V; 3.0V; 3.3V 2.0 mA ±2.0 PPM (See table below) ±0.3 PPM ±0.3 PPM 0.8Vp-p min [10kΩ//10pF]+-10% ±3 ~ ±15 PPM ±1.0 PPM 3.0 mS -130 dBc/Hz Typical 260˚C / 10 Seconds x 2 1 Au over Ni Yes Yes *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary All specifications subject to change without notice. Available Options by Stability & Operating Temp Operating Temperature ±1 PPM ±1.5 PPM ±2 PPM ±2.5 PPM -30 ~+85˚C O O O O -40 ~+85˚C O O O ∆ -40 ~+105˚C X X X X Key: O=Available, X=Not Available, NA=Not Applicable, ∆ = Consult Fox Engineering 1 For proper operation, a control voltage (Vc) must be applied to pin 1 of VCTCXO’s. Revised A: 09/03/2019 Page 1 of 2 ±15 PPM NA NA O www.foxonline.com FT3CN 3.2mm x 2.5mm CSW TCXO (Former FOX923) TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 4.0 3.5 8.0 1.4 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.5 Available Options & Part Identification for TCXO Model T3CN 1 Sample PN: FT3CNBPK25.0-T3 F Fox T3CN Model Number T3CN = TCXO B Voltage B = +3.3V±5% D = +3.0V±5% Q = +2.8V±5% S = +2.7V±5% H = +2.5V±5% P Stability T = ±1.0 PPM S = ±1.5 PPM R = ±2.0 PPM P = ±2.5 PPM F = ±15 PPM K Operating Temperature K = -30 to +85°C M = -40 to +85°C P = -40 to +105°C 25.0 Frequency (MHz) -T3 Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs 1 Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities/operating temp table. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 09/03/2019 Page 2 of 2 www.foxonline.com