FT3GNBUK26.0-BULK

FT3GN 3.2mm x 2.5mm CSW GPS TCXO (Former FOX923_GP) Features • Analog Temperature Compensation STANDARD SPECIFICATIONS PARAMETERS Frequency Range (MHz) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) (±5%) Input Current (IDD) Initial Frequency Tolerance @ 25°C (after reflow) Vc = 0.5VDD Frequency Stability Over Temperature Range Over Supply Voltage Change (VDD±5%) Over Load Change [10kΩ//10pF]+-10% Output Voltage Level Output Load Pullability Vc = 0.5VDD ±0.5VDD Aging per year Startup Time (TS) Phase Noise (@ 1kHz offset) Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish Lead-Free RoHS/REACH Compliant MAX (Unless otherwise noted) 16 ~ 52.000 DIMENSIONS / MECHANICAL SPECIFICATIONS (See table below) -40°C ~ +85°C 1.8V; 2.5V; 2.7V; 2.8V; 3.0V; 3.3V 2.0 mA ±2.0 PPM ±0.5PPM ±0.3 PPM ±0.3 PPM 0.8Vp-p min [10kΩ//10pF]+-10% ±5 PPM min ±1.0 PPM 3.0 mS -130 dBc/Hz Typical 260˚C / 10 Seconds x 2 1 Au over Ni Yes Yes A DC-Cut capacitor (1000pF) should be connected to the output. For proper operation, a control voltage (Vc) must be applied to pin 1 of VCTCXO’s. All specifications subject to change without notice. 1 Revised A: 11/13/2019 Page 1 of 2 www.foxonline.com FT3GN 3.2mm x 2.5mm CSW GPS TCXO (Former FOX923_GP) TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 4.0 3.5 8.0 1.4 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 Default -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.5 Available Options & Part Identification for TCXO Model T3GN1 Sample PN: FT3GNUPK26.0-T3 F Fox T3GN Model Number T3GN = TCXO D U Voltage Stability B = +3.3V±5% U = ±0.5 PPM D = +3.0V±5% Q = +2.8V±5% S = +2.7V±5% H = +2.5V±5% L = +1.8V±10% 1 Not all frequencies in the frequency range available. K Operating Temperature K = -30 to +85°C 26.0 Frequency (MHz) -T3 Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 11/13/2019 Page 2 of 2 www.foxonline.com