FT3HNBPK16.0-T1

FT3HV 3.2mm x 2.5mm HCMOS VCTCXO (Former FOX923CEH) Features • Digital Temperature Compensation STANDARD SPECIFICATIONS PARAMETERS Frequency Range (MHz) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) Initial Frequency Tolerance @ 25°C (after reflow) (T3HV: Vc = 1.66V)1 Frequency Stability Over Temperature Range Over Supply Voltage Change (3.3V±5%) Over Load Change (15pF ±5%) Rise Time (10% ~90% VDD) Fall Time (90% ~10% VDD) Symmetry (50% VDD) Output Voltage (VOL) (VOH) Output Load (CL) Pullability (T3HV: Vc = 1.65V±1.0V)1 Aging per year Startup Time (TS) Phase Noise @ 1kHz offset Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish Lead-Free RoHS/REACH Compliant MAX (Unless otherwise noted) 8.0 ~ 40.000 DIMENSIONS / MECHANICAL SPECIFICATIONS (See table below) -40°C ~ +90°C +3.3 VDC ±5% 6.0 mA ±2.0 PPM See table below ±0.3 PPM ±0.3 PPM 5nS 5nS 40% ~ 60% 10% VDD 90%VDD Min 15pF ±3 ~ ±15 PPM ±1.0 PPM 3.0 mS -130 dBc/Hz Typical 260˚C / 10 Seconds x 2 1 Au over Ni Yes Yes Available Options by Stability & Operating Temp Operating Temperature ±1 PPM ±1.5 PPM ±2 PPM ±2.5 PPM ±15 PPM -30 ~+85˚C O O O O NA -40 ~+85˚C O O O NA ∆ -40 ~+105˚C X X X X O Key: O=Available, X=Not Available, NA=Not Applicable, ∆ = Consult Fox Engineering 1 For proper operation, a control voltage (Vc) must be applied to pin 1 of VCTCXO’s. All specifications subject to change without notice. Revised B: 08/16/2021 Page 1 of 2 www.foxonline.com FT3HV 3.2mm x 2.5mm HCMOS VCTCXO (Former FOX923CEH) TAPE SPECIFICATIONS (mm) A B C D E F ø1.5 4.0 4.0 3.5 8.0 1.4 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 default -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.5 Available Options & Part Identification for VCTCXO Model T3HV1 Sample PN: FT3HVBPK25.0-T3 F Fox T3HN Model Number T3HV = VCTCXO B Tolerance B = +3.3V±5% P Stability T = ±1.0 PPM S = ±1.5 PPM R = ±2.0 PPM P = ±2.5 PPM F = ±15 PPM K Operating Temperature K = -30 to +85°C M = -40 to +85˚C P = -40 to +105˚C 25.0 Frequency (MHz) -T3 Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs 1 Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities/operating temp table. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised B: 08/16/2021 Page 2 of 2 www.foxonline.com