FT5CNDPK12.8-T1

FT5CV 5.0mm x 3.2mm CSW VCTCXO (Former FOX914E) Features • Digital Temperature Compensation STANDARD SPECIFICATIONS PARAMETERS Frequency Range (MHz) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) (±5%) Input Current (IDD) Initial Frequency Tolerance @ 25°C (after reflow) (T5CV: Vc = 1.65V)1 Frequency Stability Over Temperature Range Over Supply Voltage Change (3.0V±5%) Over Load Change [10kΩ//10pF]±10% Output Voltage Level Output Load Pullability (Vc = 1.65V ±1.0V)1 Aging per year Startup Time (TS) Phase Noise @ 1kHz offset Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish Lead-Free RoHS/REACH Compliant Operating Temperature -30 ~+85˚C -40 ~+85˚C MAX (Unless otherwise noted) 8.000 ~ 40.000 DIMENSIONS / MECHANICAL SPECIFICATIONS See table below -40°C ~ +85°C +3.0V±5% 2.0 mA ±2.0 PPM See table below ±0.2 PPM ±0.2 PPM 0.8Vp-p min [10kΩ//10pF]±10% ±3 ~ ±20 PPM min ±1.0 PPM 2.0 mS Max -130 dBc/Hz Typical 260˚C / 10 Seconds x 2 1 Au over Ni Yes Yes *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, Available Options by Stability & Operating Tempreference pin shape, etc. may vary All specifications subject to change±2.5 without ±1 PPM ±1.5 PPM ±2 PPM PPMnotice. O O O O X O O O Key: O=Available, X=Not Available 1 For proper operation, a control voltage (Vc) must be applied to pin 1 of VCTCXO’s. All specifications subject to change without notice. Revised A: 08/29/2019 Page 2 of 6 www.foxonline.com FT5CV 5.0mm x 3.2mm CSW VCTCXO (Former FOX914E) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M ø1.5 4.0 8.0 5.5 12.0 1.7 -T1 = 1,000 2.0 Ø13 Ø21 Ø80 Ø180 13.5 2.0 Available Options & Part Identification for VCTCXO Model T5CV 1 Sample PN: FT5CVDPK25.0-T1 F Fox 1 T5CV Model Number T5CV = VCTCXO D Voltage D = +3.0V±5% P Stability T = ±1.0 PPM S = ±1.5 PPM R = ±2.0 PPM P = ±2.5 PPM K Operating Temperature K = -30 to +85°C M = -40 to +85°C 25.0 Frequency (MHz) -T1 Values Added Options Blank = Bulk T1 = 1,000 pcs Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities/operating temp table. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 08/29/2019 Page 3 of 6 www.foxonline.com