FT5CNDPK20.0-T1

FT5CN 5.0mm x 3.2mm CSW TCXO (Former FOX914B) Features • Digital Temperature Compensation STANDARD SPECIFICATIONS PARAMETERS Frequency Range (MHz) Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) (±5%) Input Current (IDD) Initial Frequency Tolerance @ 25°C (after reflow) (T5CV: Vc = 1.65V)1 Frequency Stability Over Temperature Range Over Supply Voltage Change (3.0V±5%) Over Load Change [10kΩ//10pF]±10% Output Voltage Level Output Load Aging per year Startup Time (TS) Phase Noise @ 1kHz offset Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish Lead-Free RoHS/REACH Compliant DIMENSIONS / MECHANICAL SPECIFICATIONS MAX (Unless otherwise noted) 8.000 ~ 40.000 See table below -40°C ~ +85°C +3.0V±5% 2.0 mA ±2.0 PPM See table below ±0.2 PPM ±0.2 PPM 0.8Vp-p min [10kΩ//10pF]±10% ±1.0 PPM 2.0 mS -130 dBc/Hz Typical 260˚C / 10 Seconds x 2 1 Au over Ni Yes Yes *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary All specifications subject to change without notice. Operating Temperature -30 ~+85˚C -40 ~+85˚C Revised B: 11/04/2022 Available Options by Stability & Operating Temp ±1 PPM ±1.5 PPM O O X O Key: O=Available, X=Not Available Page 1 of 2 ±2 PPM O O ±2.5 PPM O O www.foxonline.com FT5CN 5.0mm x 3.2mm CSW TCXO (Former FOX914B) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M ø1.5 4.0 8.0 5.5 12.0 1.7 -T1 = 1,000 2.0 Ø13 Ø21 Ø80 Ø180 13.5 2.0 Available Options & Part Identification for TCXO Model FT5CN 1 Sample PN: FT5CNDPK25.0-T1 F Fox T5CN Model Number T5CN = TCXO D Voltage D = +3.0V±5% P Stability T = ±1.0 PPM S = ±1.5 PPM R = ±2.0 PPM P = ±2.5 PPM K Operating Temperature K = -30 to +85°C M = -40 to +85°C 25.0 Frequency (MHz) -T1 Values Added Options Blank = Bulk T1 = 1,000 pcs Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities/operating temp table. 1 Reliability Test Conditions Please contact Abracon Quality Assurance department Revised B: 11/04/2022 Page 2 of 2 www.foxonline.com