FY3HCJE24.576-T1

Engineering/Process Change Notice ECN/PCN No.: 3937 For Manufacturer Product Description: Voltage Controlled Crystal Oscillator Abracon Part Number / Part Series: FY3H Series ☐ Documentation only ☐ ECN ☒ EOL New Revision: Application: VCXO Affected Revision: Rev. A EOL ☒ Series ☐ Part Number ☐ Safety ☒ Non-Safety Prior to Change: FY3H Rev. A https://abracon.com/datasheets/Fox/FY3H.pdf After Change: EOL Cause/Reason for Change: Discontinuation of manufacturing capability Change Plan Effective Date: 08/18/21 Additional Remarks: N/A Change Declaration: N/A Issued Date: Approval: 08/18/21 Thomas Culhane Engineering Director Issued By: Approval: Stephanie Lopez Reuben Quintanilla Quality Director Issued Department: Engineering Approval: Ying Huang Purchasing Director For Abracon EOL only Last Time Buy (if applicable): None Additional Approval: Alternate Part Number / Part Series: None Additional Approval: Additional Approval: Customer Approval (If Applicable) Qualification Status: ☐ Approved ☐ Not accepted Note: It is considered approved if there is no feedback from the customer 1 month after ECN/PCN is released. Customer Part Number: Company Name: Customer Project: Company Representative: Customer Remarks: Form #7020 | Rev. G | Effective: 02/22/2021 | Page 1 of 1 Representative Signature: FY3H 3.2mm x 2.5mm HCMOS SMD VCXO (Former FVM Series) Features • • VCXO Supply Voltage: 3.3V SPECIFICATIONS MAX (Unless otherwise noted) 1.25~ 125.000 MHz See Table -55°C ~ +125˚C (See options below) ±100ppm 3.3V ± 10% 1.65V ± 1.65V EO L PARAMETERS Frequency Range Temperature Range Operating (TOPR) Storage (TSTG) Frequency Stability Pull ability (VC = 1.65V ± 1.65V) Supply Voltage (VDD) Control Voltage (VC) Input Current (IDD) 1.25 ~ 50.000MHz 50+ ~ 80.000MHz 80+ ~ 100.000MHz 100+ ~ 125MHz Output Symmetry (50% VDD) Rise/Fall Time (20% ~ 80% VDD) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Frequency Linearity Modulation Bandwidth VC Input Impedance 10 mA 15 mA 20 mA 25 mA 40% ~ 60% 5 nS 15 pF 10 mS ± 10% 20 kHz Min 5MΩ typ 10%VDD 90%VDD Min Available Options by Stability & Operating Temp Frequency Stability ±25PPM1 ±50PPM1 ±50PPM1 Operating Temperature (°C) -10 ~ +70 -10 ~ +70 -40 ~ +85 Frequency Range (MHz) 1.25 ~ 125.0 1.25 ~ 125.0 1.25 ~ 125.0 1 Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, shock, Vibration, reflow, and one-year aging and VC=1.65V. Revised A: 11/14/2019 Page 1 of 3 www.foxonline.com FY3H 3.2mm x 2.5mm HCMOS SMD VCXO (Former FVM Series) EO L DIMENSIONS / MECHANICAL SPECIFICATIONS Note: *A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise. *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free ROHS/REACH Compliant Revised A: 11/14/2019 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Page 3 of 7 www.foxonline.com FY3H 3.2mm x 2.5mm HCMOS SMD VCXO (Former FVM Series) TAPE SPECIFICATIONS (mm) B C D E F ø1.55 4.0 4.0 3.5 8.0 1.4 REEL QTY -T3 = 3,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.2 EO L A REEL SPECIFICATIONS (mm) Available Options & Part Identification for HCMOS SMD VCXO Y3H* Sample PN: FY3HCJM27.0-T3 F Y3H C Fox Model Number Voltage C = 3.3V±10% J M Stability/Pull ability Operating H = ±25ppm/±100ppm Temperature J = ±50ppm/±100PPM E = -10 to +70˚C M = -40 to +85˚C 27.0 -T3 Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T3 = 3,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 11/14/2019 Page 3 of 3 www.foxonline.com