FY7HCHM49.152-BULK

FY7H 7.5mm x 5.2mm HCMOS VCXO (Former VCS series) Features • • VCXO Supply Voltage: 3.3V 3.3V SPECIFICATIONS PARAMETERS Frequency Range Temperature Range Operating (TOPR) Storage (TSTG) Frequency Stability Pull ability (VC = 1.65V ± 1.5V) Supply Voltage (VDD) Control Voltage (VC)2 Input Current (IDD) 1.0 ~ 30MHz >30.0 ~ 45MHz >45.0 ~ 96MHz Output Symmetry (50% VDD) Rise/Fall Time (10% ~ 90% VDD) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Enable/Disable Time 3 Frequency Linearity Modulation Bandwidth MAX (Unless otherwise noted) 1.000~ 96.000 MHz See Table -40°C ~ +85˚C (See options below) (See options below) 3.3V ± 5% 1.65V ± 1.5V 15 mA 25 mA 50 mA 40% ~ 60% 5 nS 15 pF 10 mS 150 nS ± 10% 20 kHz Min 10%VDD 90%VDD Min ENABLE / DISABLE FUNCTION Pin1 OPEN 1 ‘1’ Level VIH ≥ 70%VDD ‘0’ Level VIL ≤ 30%VDD Output Active Active High Z Available Options by Stability & Operating Temp Frequency Stability ±100PPM2 ±100PPM2 ±50PPM2 ±50PPM2 ±25PPM2 ±25PPM3 Operating Temperature (°C) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 Frequency Range (MHz) 1.0 ~ 96.0 1.0 ~ 96.0 1.0 ~ 96.0 1.0 ~ 96.0 1.0 ~ 96.0 1.0 ~ 96.0 An internal pull-up resistor from pin 2 to pin 4 allows active output if pin 2 is left open Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, shock, Vibration, reflow, and one-year aging and Vc=1.65V. 3 Inclusive of 25°C tolerance, operating temperature range and Vc=1.65V. 1 2 Revised B: 08/22/2022 Page 1 of 3 www.foxonline.com FY7H 7.5mm x 5.2mm HCMOS VCXO (Former VCS series) DIMENSIONS / MECHANICAL SPECIFICATIONS Note: *A 0.01μF capacitor should be placed between VDD (Pin 6) and GND (Pin3) to minimize power supply line noise. *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellation’s, reference pin shape, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free ROHS/REACH Compliant Revised B: 08/22/2022 MAX (Unless otherwise noted) 260°C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Page 2 of 3 www.foxonline.com FY7H 7.5mm x 5.2mm HCMOS VCXO (Former VCS series) TAPE SPECIFICATIONS (mm) A B C D E F ø1.55 4.0 8.0 7.5 16.0 2.15 REEL SPECIFICATIONS (mm) REEL QTY -T2 = 2,000 -T1 = 1,000 G H I J K L M 2.0 Ø13 Ø21 Ø80 Ø255 17.5 2.0 Available Options & Part Identification for HCMOS VCXO FY7H* Sample PN: FY7HCJM27.0-T2 F Y7H C Fox Model Number Voltage C = 3.3V±10% J M 27.0 Stability/Pullability Operating Frequency (MHz) E = ±25PPM/±50PPM Temperature F = ±50PPM/±50PPM E = -10 to +70ºC H = ±25PPM/±100PPM M = -40 to +85ºC J = ±50PPM/±100PPM K = ±100PPM/±100PPM -T2 Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs * Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. Reliability Test Conditions Please contact Abracon Quality Assurance department Revised B: 08/22/2022 Page 3 of 3 www.foxonline.com