VCS15AXTR

3.3V LOW PROFILE SMD VCXO MODEL: VCSAXT SERIES FEATURES • • • • OPTIONS • Many Stability/Pullability Options 3.3V Operation • -40ºC ~ +85ºC Option ('R' Version) HCMOS Output Enable/Disable Tape and Reel (2,000 pcs. STD) • PART NUMBER SELECTION Learn More - Internet Required Part Number 421-Frequency-xxxxx 437-Frequency-xxxxx 422-Frequency-xxxxx 439-Frequency-xxxxx 423-Frequency-xxxxx 443-Frequency-xxxxx 424-Frequency-xxxxx 445-Frequency-xxxxx 425-Frequency-xxxxx 441-Frequency-xxxxx Model Number VCS12AXT VCS12AXTR3 VCS15AXT VCS15AXTR VCS22AXT VCS22AXTR3 VCS25AXT VCS25AXTR VCS20AXT VCS20AXTR Frequency Frequency Operating Frequency Stability1 Pullability Temperature ±50PPM -10 ~ +70(ºC) 1.000~80.000 ±25PPM ±50PPM -40 ~ +85(ºC) 1.000~80.000 ±25PPM ±50PPM -10 ~ +70(ºC) 1.000~80.000 ±50PPM ±50PPM -40 ~ +85(ºC) 1.000~80.000 ±50PPM ±100PPM -10 ~ +70(ºC) 1.000~80.000 ±25PPM ±100PPM -40 ~ +85(ºC) 1.000~80.000 ±25PPM ±100PPM -10 ~ +70(ºC) 1.000~80.000 ±50PPM ±100PPM -40 ~ +85(ºC) 1.000~80.000 ±50PPM ±100PPM ±100PPM -10 ~ +70(ºC) 1.000~80.000 ±100PPM ±100PPM -40 ~ +85(ºC) 1.000~80.000 Learn more about: Part Marking Identification Tape and Reel Specification Internet required • ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Control Voltage (VC) Input Current (IDD) 1.000 ~ 30.000 MHz 30.000+ ~ 45.000 MHz 45.000+ ~ 80.000 MHz Output Symmetry (50% VDD) Rise Time (10% ~ 90% VDD) (TR) Fall Time (90% ~ 10% VDD) (TF) Output Voltage (VOL) (VOH) Output Current (IOL) (IOH) Output Load (HCMOS) Start-up Time (TS) Enable/Disable Time 2 Frequency Linearity Modulation Bandwidth 1 2 MAX (unless otherwise noted) 1.000 ~ 80.0004 MHz -40ºC ~ +85ºC 3.3V ± 10% 1.65V ± 1.5V 15mA 25mA 50mA 40% ~ 60% 5nS 5nS 10% VDD 90% VDD Min 4.0mA Min -1.0mA Min 15pF 10mS 150nS ±10% 20 kHz Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, vibration, and Vc = 1.65V. An internal pullup resistor from pin 2 to pin 6 allows active output if pin 2 is left open. 3 Available on an individual inquiry basis. 4 Custom specifications from 45.000 to 80.000 MHz available on an individual inquiry basis. Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 6) and GND (Pin 3) to minimize power supply line noise. Note: An alternate pin connection with E/D on pin #5 is available. All specifications subject to change without notice. Rev. 6/1/04 All dimensions are in millimeters. • ENABLE / DISABLE FUNCTION INH (Pin 2) OUTPUT (Pin 4) OPEN 2 ACTIVE '1' Level VIH ≥ 70% VDD ACTIVE '0' Level VIL ≤ 30% VDD High Z 76 FOX Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com © 2004 FOX ELECTRONICS