ATC100B0R2BT500XT

Freescale Semiconductor Technical Data Document Number: MRF7S21170H Rev. 5, 4/2008 RF Power Field Effect Transistors N - Channel Enhancement - Mode Lateral MOSFETs Designed for CDMA base station applications with frequencies from 2110 to 2170 MHz. Suitable for CDMA and multicarrier amplifier applications. To be used in Class AB and Class C for PCN - PCS/cellular radio and WLL applications. • Typical Single - Carrier W - CDMA Performance: VDD = 28 Volts, IDQ = 1400 mA, Pout = 50 Watts Avg., Full Frequency Band, 3GPP Test Model 1, 64 DPCH with 50% Clipping, Channel Bandwidth = 3.84 MHz, Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF. Power Gain — 16 dB Drain Efficiency — 31% Device Output Signal PAR — 6.1 dB @ 0.01% Probability on CCDF ACPR @ 5 MHz Offset — - 37 dBc in 3.84 MHz Channel Bandwidth • Capable of Handling 5:1 VSWR, @ 32 Vdc, 2140 MHz, 170 Watts CW Output Power • Pout @ 1 dB Compression Point w 170 Watts CW Features • 100% PAR Tested for Guaranteed Output Power Capability • Characterized with Series Equivalent Large - Signal Impedance Parameters • Internally Matched for Ease of Use • Integrated ESD Protection • Greater Negative Gate - Source Voltage Range for Improved Class C Operation • Optimized for Doherty Applications • RoHS Compliant • In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel. MRF7S21170HR3 MRF7S21170HSR3 2110 - 2170 MHz, 50 W AVG., 28 V SINGLE W - CDMA LATERAL N - CHANNEL RF POWER MOSFETs CASE 465B - 03, STYLE 1 NI - 880 MRF7S21170HR3 CASE 465C - 02, STYLE 1 NI - 880S MRF7S21170HSR3 Table 1. Maximum Ratings Rating Drain - Source Voltage Gate - Source Voltage Operating Voltage Storage Temperature Range Case Operating Temperature Operating Junction Temperature (1,2) Symbol VDSS VGS VDD Tstg TC TJ Value - 0.5, +65 - 6.0, +10 32, +0 - 65 to +150 150 225 Unit Vdc Vdc Vdc °C °C °C Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 80°C, 170 W CW Case Temperature 73°C, 25 W CW Symbol RθJC Value (2,3) 0.31 0.36 Unit °C/W 1. Continuous use at maximum temperature will affect MTTF. 2. MTTF calculator available at http://www.freescale.com/rf . Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf . Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2006-2008. All rights reserved. MRF7S21170HR3 MRF7S21170HSR3 1 RF Device Data Freescale Semiconductor Table 3. ESD Protection Characteristics Test Methodology Human Body Model (per JESD22 - A114) Machine Model (per EIA/JESD22 - A115) Charge Device Model (per JESD22 - C101) Class 1A (Minimum) B (Minimum) IV (Minimum) Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted) Characteristic Off Characteristics Zero Gate Voltage Drain Leakage Current (VDS = 65 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) Gate - Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) On Characteristics Gate Threshold Voltage (VDS = 10 Vdc, ID = 372 μAdc) Gate Quiescent Voltage (VDS = 28 Vdc, ID = 1400 mAdc) Fixture Gate Quiescent Voltage (1) (VDD = 28 Vdc, ID = 1400 mAdc, Measured in Functional Test) Drain - Source On - Voltage (VGS = 10 Vdc, ID = 3.72 Adc) Dynamic Characteristics (2) Reverse Transfer Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Output Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Crss Coss — — 0.9 703 — — pF pF VGS(th) VGS(Q) VGG(Q) VDS(on) 1.2 — 4.5 0.1 2 2.7 5.4 0.15 2.7 — 6.5 0.3 Vdc Vdc Vdc Vdc IDSS IDSS IGSS — — — — — — 10 1 500 μAdc μAdc nAdc Symbol Min Typ Max Unit Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 1400 mA, Pout = 50 W Avg., f = 2112.5 MHz and f = 2167.5 MHz, Single - Carrier W - CDMA, 3GPP Test Model 1, 64 DPCH, 50% Clipping, Input Signal PAR = 7.5 dB @ 0.01% Probability on CCDF. ACPR measured in 3.84 MHz Channel Bandwidth @ ±5 MHz Offset. Power Gain Drain Efficiency Output Peak - to - Average Ratio @ 0.01% Probability on CCDF Adjacent Channel Power Ratio Input Return Loss Gps ηD PAR ACPR IRL 15 29 5.7 — — 16 31 6.1 - 37 - 15 18 — — - 35 -9 dB % dB dBc dB 1. VGG = 2 x VGS(Q). Parameter measured on Freescale Test Fixture, due to resistive divider network on the board. Refer to Test Circuit schematic. 2. Part internally matched both on input and output. (continued) MRF7S21170HR3 MRF7S21170HSR3 2 RF Device Data Freescale Semiconductor Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued) Characteristic Video Bandwidth @ 170 W PEP Pout where IM3 = - 30 dBc (Tone Spacing from 100 kHz to VBW) ΔIMD3 = IMD3 @ VBW frequency - IMD3 @ 100 kHz