MHPA19010N

Freescale Semiconductor Technical Data Document Number: MHPA19010N Rev. 6, 5/2006 PCS Band RF Linear LDMOS Amplifier Designed for Class AB amplifier applications in 50 ohm systems operating in the PCS frequency band. A silicon FET design provides outstanding linearity and gain. In addition, the excellent group delay and phase linearity characteristics are ideal for digital modulation systems, such as TDMA and CDMA. • Typical CDMA Performance: 1960 MHz, 28 Volts IS - 95 CDMA Pilot, Sync, Paging, Traffic Codes 8 Through 13 • Adjacent Channel Power: - 51 dBc @ 30 dBm, 885 kHz Channel Spacing • Power Gain: 24.5 dB Min (@ f = 1960 MHz) • 0.2 dB Typical Gain Flatness Features • Excellent Phase Linearity and Group Delay Characteristics • Ideal for Feedforward Base Station Applications • N Suffix Indicates Lead - Free Terminations MHPA19010N 1930- 1990 MHz 10 W, 24.5 dB RF HIGH POWER LDMOS AMPLIFIER CASE 301AP - 02, STYLE 3 Table 1. Maximum Ratings (TC = 25°C unless otherwise noted) Rating DC Supply Voltage RF Input Power (Single Carrier CW) Storage Temperature Range Operating Case Temperature Range Quiescent Bias Current Symbol VDD Pin Tstg TC IDQ Value 30 +20 - 40 to +100 - 20 to +100 750 Unit Vdc dBm °C °C mA Table 2. Electrical Characteristics (VDD = 28 Vdc, VBIAS ≅ 8 V Set for Supply Current of 600 mA, TC = 25°C, 50 Ω System) Characteristic Supply Current Power Gain Gain Flatness Power Output @ 1 dB Comp. Input VSWR Noise Figure (f = 1960 MHz) (f = 1930 - 1990 MHz) (f = 1960 MHz) (f = 1930 - 1990 MHz) (f = 1960 MHz) Symbol IDD Gp GF P1dB VSWRin NF ACPR Min — 24.5 — — — — — Typ 600 25 0.2 41.5 1.5:1 8 - 58 Max — — 0.5 — 2:1 10 - 51 dB dBc Unit mA dB dB dBm Adjacent Channel Power Rejection @ 30 dBm, 1.23 MHz BW, 885 kHz Channel Spacing © Freescale Semiconductor, Inc., 2006. All rights reserved. MHPA19010N 1 RF Device Data Freescale Semiconductor TYPICAL CHARACTERISTICS 10 IRL/ORL, INPUT/OUTPUT RETURN LOSS (dB) 5 0 −5 −10 −15 −20 −25 −30 1930 1940 1950 1960 1970 1980 IRL ORL VDD = 28 Vdc Pout = 5 W IDQ = 600 mA 100 kHz Tone Spacing Gps 28 27 26 25 24 23 22 21 20 1990 28 27 G ps , POWER GAIN (dB) G ps , POWER GAIN (dB) 26 25 24 23 22 21 η −10_C 25_C 85_C 1930 1940 1950 1960 1970 1980 1990 Gps TC = 25_C −10_C 85_C VDD = 28 Vdc Pout = 1 W (Avg.) IDQ = 600 mA 2−Carrier CDMA Carrier Spacing = 2.5 MHz Carrier Bandwidth = 1.2288 MHz 20 18 16 14 12 10 8 6 4 2000 η, DRAIN EFFICIENCY (%) 20 1920 f, FREQUENCY (MHz) f, FREQUENCY (MHz) Figure 1. Two - Tone Power Gain, Input Return Loss and Output Return Loss versus Frequency IM3, THIRD ORDER INTERMODULATION DISTORTION (dBc) Figure 2. 2 - Carrier CDMA Power Gain and Efficiency versus Frequency ACPR, ADJACENT CHANNEL POWER RATIO (dBc) IMD, INTERMODULATION DISTORTION (dBc) −35 TC = −10_C −40 25_C 85_C ACPR −50 −10_C 25_C −55 85_C ACPR @ 885 kHz, Bandwidth = 30 kHz IM3 @ 2.5 MHz, Bandwidth = 1.2288 MHz −60 1920 1930 1940 1950 1960 1970 1980 1990 IM3 2−Carrier CDMA, Carrier Spacing = 2.5 MHz Carrier Bandwidth = 1.2288 MHz VDD = 28 Vdc, POUT = 1 W (Avg.), IDQ = 600 mA −20 −25 −30 −35 −40 −45 100 kHz −50 10 MHz −55 −60 15 20 25 30 35 40 Pout, OUTPUT POWER (dBm) PEP VDD = 28 Vdc, IDQ = 600 mA 100 kHz: f1 = 1959.95 MHz f2 = 1960.05 MHz 10 MHz: f1 = 1955 MHz f2 = 1965 MHz −30 −45 −40 −50 −60 −70 2000 f, FREQUENCY (MHz) Figure 3. 2 - Carrier CDMA IM3 and ACPR versus Frequency IM3, THIRD ORDER INTERMODULATION DISTORTION (dBc) η, DRAIN EFFICIENCY (%), P out OUTPUT POWER (dBm) Figure 4. Two - Tone CDMA IMD versus Output Power −25 −30 −35 500 mA −40 −45 −50 −55 −60 15 20 25 30 35 40 Pout, OUTPUT POWER (dBm) PEP 600 mA VDD = 28 Vdc f1 = 1959.95 MHz f2 = 1960.05 MHz 700 mA IDQ = 800 mA 48 42 36 30 Pout 24 18 12 6 0 −5 0 5 10 PIN, (dBm) η VDD = 28 Vdc IDQ = 600 mA f = 1960 MHz 15 20 25 Gps 27.5 27 26.5 26 25.5 25 24.5 24 23.5 G ps , POWER GAIN (dB) Figure 5. Third Order Intermodulation Distortion versus Output Power MHPA19010N 2 Figure 6. CW Output Power, Efficiency and Gain versus Input Power RF Device Data Freescale Semiconductor TYPICAL CHARACTERISTICS −30 −35 −40 IM3 (dBc), ACPR (dBc) −45 −50 −55 −60 −65 −70 −75 −80 5 10 ACPR η 15 20 25 30 IM3 VDD = 28 Vdc IDQ = 600 mA f1 = 1960 MHz f2 = 1962.5 MHz 10 9 η, DRAIN EFFICIENCY (%) 8 7 6 5 4 3 2 1 0 35 Pout, OUTPUT POWER (dBm) Figure 7. 2 - Carrier CDMA ACPR, IM3 and Efficiency versus Output Power MHPA19010N RF Device Data Freescale Semiconductor 3 NOTES MHPA19010N 4 RF Device Data Freescale Semiconductor NOTES MHPA19010N RF Device Data Freescale Semiconductor 5 NOTES MHPA19010N 6 RF Device Data Freescale Semiconductor PACKAGE DIMENSIONS A G 0.020 (0.51) M A S 2X Q 0.008 (0.20) M TS M A M TA M B R J K W 4X 1 2 3 4 S NOTES: 1. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION "F" TO CENTER OF LEADS. INCHES MIN MAX 1.760 1.780 1.370 1.390 0.245 0.265 0.017 0.023 0.080 0.100 0.086 BSC 1.650 BSC 1.290 BSC 0.266 0.280 0.125 0.165 0.990 BSC 0.390 BSC 0.008 0.013 0.118 0.132 0.535 0.555 0.445 0.465 0.090 BSC MILLIMETERS MIN MAX 44.70 45.21 34.80 35.31 6.22 6.73 0.43 0.58 2.03 2.54 2.18 BSC 41.91 BSC 32.77 BSC 6.76 7.11 3.18 4.19 25.15 BSC 9.91 BSC 0.20 0.33 3.00 3.35 13.59 14.10 11.30 11.81 2.29 BSC D M N L H F E C T SEATING PLANE M 0.020 (0.51) M TB 4X P 0.020 (0.51) T DIM A B C D E F G H J K L N P Q R S W STYLE 3: PIN 1. 2. 3. 4. CASE: RF INPUT VBIAS VDD RF OUTPUT GROUND CASE 301AP - 02 ISSUE E Note: VDD (Pin 3) should always be applied before VBIAS (Pin 2). MHPA19010N RF Device Data Freescale Semiconductor 7 How to Reach Us: Home Page: www.freescale.com E - mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1 - 800- 521- 6274 or +1 - 480- 768- 2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1 - 8 - 1, Shimo - Meguro, Meguro - ku, Tokyo 153 - 0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1 - 800- 441- 2447 or 303 - 675- 2140 Fax: 303 - 675- 2150 LDCForFreescaleSemiconductor@hibbertgroup.com RoHS-compliant and/or Pb- free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb- free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale.s Environmental Products program, go to http://www.freescale.com/epp. Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. RoHS- compliant and/or Pb - free versions of Freescale products have the functionality and electrical characteristics of their non - RoHS- compliant and/or non - Pb- free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale’s Environmental Products program, go to http://www.freescale.com/epp. MHPA19010N 8Rev. 6, 5/2006 Document Number: MHPA19010N RF Device Data Freescale Semiconductor