Freescale Semiconductor Technical Data
Document Number: MRFE6S9201H Rev. 1, 12/2008
RF Power Field Effect Transistors
N - Channel Enhancement - Mode Lateral MOSFETs
Designed for broadband commercial and industrial applications with frequencies up to 1000 MHz. The high gain and broadband performance of these devices make them ideal for large - signal, common - source amplifier applications in 28 volt base station equipment. • Typical Single - Carrier N - CDMA Performance: VDD = 28 Volts, IDQ = 1400 mA, Pout = 40 Watts Avg., f = 880 MHz, IS - 95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13). Channel Bandwidth = 1.2288 MHz, PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain — 20.8 dB Drain Efficiency — 31.3% Device Output Signal PAR — 8.1 dB @ 0.01% Probability on CCDF ACPR @ 750 kHz Offset — - 46.5 dBc in 30 kHz Channel Bandwidth • Capable of Handling 10:1 VSWR, @ 32 Vdc, 880 MHz, Pout = 270 W CW (2 dB Input Overdrive from Rated Pout), Designed for Enhanced Ruggedness Features • 100% PAR Tested for Guaranteed Output Power Capability • Characterized with Series Equivalent Large - Signal Impedance Parameters • Internally Matched for Ease of Use • Greater Negative Gate - Source Voltage Range for Improved Class C Operation • Qualified Up to a Maximum of 32 VDD Operation • Integrated ESD Protection • RoHS Compliant • In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel.
MRFE6S9201HR3 MRFE6S9201HSR3
880 MHz, 40 W AVG., 28 V SINGLE N - CDMA LATERAL N - CHANNEL RF POWER MOSFETs
CASE 465 - 06, STYLE 1 NI - 780 MRFE6S9201HR3
CASE 465A - 06, STYLE 1 NI - 780S MRFE6S9201HSR3
Table 1. Maximum Ratings
Rating Drain - Source Voltage Gate - Source Voltage Storage Temperature Range Case Operating Temperature Operating Junction Temperature
(1,2)
Symbol VDSS VGS Tstg TC TJ
Value - 0.5, +66 - 6.0, +10 - 65 to +150 150 225
Unit Vdc Vdc °C °C °C
Table 2. Thermal Characteristics
Characteristic Thermal Resistance, Junction to Case Case Temperature 85°C, 197 W CW Case Temperature 75°C, 40 W CW Symbol RθJC Value (2,3) 0.34 0.33 Unit °C/W
1. Continuous use at maximum temperature will affect MTTF. 2. MTTF calculator available at http://www.freescale.com/rf . Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf . Select Documentation/Application Notes - AN1955.
© Freescale Semiconductor, Inc., 2007-2008. All rights reserved.
MRFE6S9201HR3 MRFE6S9201HSR3 1
RF Device Data Freescale Semiconductor
Table 3. ESD Protection Characteristics
Test Methodology Human Body Model (per JESD22 - A114) Machine Model (per EIA/JESD22 - A115) Charge Device Model (per JESD22 - C101) Class 1B (Minimum) A (Minimum) IV (Minimum)
Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted)
Characteristic Off Characteristics Zero Gate Voltage Drain Leakage Current (VDS = 66 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) Gate - Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) On Characteristics Gate Threshold Voltage (VDS = 10 Vdc, ID = 400 μAdc) Gate Quiescent Voltage (VDD = 28 Vdc, ID = 1400 mAdc, Measured in Functional Test) Drain - Source On - Voltage (VGS = 10 Vdc, ID = 4.11 Adc) Dynamic Characteristics (1) Reverse Transfer Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Output Capacitance (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Input Capacitance (VDS = 28 Vdc, VGS = 0 Vdc ± 30 mV(rms)ac @ 1 MHz) Crss Coss Ciss — — — 2.3 90 480 — — — pF pF pF VGS(th) VGS(Q) VDS(on) 1.5 2.25 0.1 2.2 2.9 0.21 3 3.75 0.35 Vdc Vdc Vdc IDSS IDSS IGSS — — — — — — 10 1 10 μAdc μAdc μAdc Symbol Min Typ Max Unit
Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 1400 mA, Pout = 40 W Avg. N - CDMA, f = 880 MHz, Single - Carrier N - CDMA, 1.2288 MHz Channel Bandwidth Carrier. ACPR measured in 30 kHz Channel Bandwidth @ ±750 kHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain Drain Efficiency Output Peak - to - Average Ratio @ 0.01% Probability on CCDF Adjacent Channel Power Ratio Input Return Loss 1. Part is internally matched on input. (continued) Gps ηD PAR ACPR IRL 19.5 29 7.7 — — 20.8 31.3 8.1 - 46.5 - 16 22.5 — — - 45 -9 dB % dB dBc dB
MRFE6S9201HR3 MRFE6S9201HSR3 2 RF Device Data Freescale Semiconductor
Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued)
Characteristic Symbol Min Typ Max Unit MHz — 10 — Typical Performances (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 1400 mA, 865 - 900 MHz Bandwidth Video Bandwidth @ 200 W PEP Pout where IM3 = - 30 dBc (Tone Spacing from 100 kHz to VBW) ΔIMD3 = IMD3 @ VBW frequency - IMD3 @ 100 kHz