2308-07

Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil—2308 series A. Mechanical Drawing: B. Electrical Specification: Part No. 2308-01 2308-02 2308-03 2308-04 2308-05 2308-06 2308-07 C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. Turns 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6 1/2 7 1/2 L Min. (uH) L Nom. (uH) L Max. (uH) Q Min. @ L Nom. Color 0.040 0.044 0.048 100 Brown 0.055 0.067 0.081 100 Red 0.073 0.093 0.118 100 Orange 0.091 0.120 0.158 100 Yellow 0.110 0.146 0.193 100 Green 0.129 0.170 0.224 100 Blue 0.148 0.194 0.253 100 Violet D. Measurement: 1. 2. 3. 4. Q and L measured with leads connected directly. L min. measured without core. Inductance greater than 0.1uH read at recommended Q meter frequency. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A) IMC 2308 series Mar. 01, 2002 Page 1 of 1