SCM2012F-181M-I-LF

Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: http://www.frontierusa.com SMD Wire Wound EMI Common Mode Chip—SCM2012F-I series A. Electrical specifications: Part Number SCM2012F-670M-I SCM2012F-900M-I SCM2012F-121M-I SCM2012F-181M-I SCM2012F-261M-I SCM2012F-371M-I Common Mode Impedance (Ω) (Typical) @ 100MHz 67 90 120 180 260 370 Rated Current (mA) 400 330 370 330 300 280 DC Resistance (OHM) Max. 0.25 0.35 0.30 0.35 0.40 0.45 Rated Voltage (Vdc) Withstand Voltage (Vdc) Insulation Resistance @125VdC (MΩ) Min. 50 125 10 B. Mechanical Drawing: 2.0 ± 0.2 1.20 ± 0.2 1.20 ± 0.2 (1) 0.17 (2) (1) (2) (4) 0.40 0.45 (Typ) 1.20 (3) (4) 0.45(Typ) (3) 0.80 2.60 Unit: mm C. Features: 1. 2. 3. 4. 5. 6. 7. Recommended Land Pattern Tolerance: M: ± 20%. Small size, low profile. Impedance range: from 67Ω to 370Ω. High common mode impedance at high frequency effects. Excellent noise suppression performance. Temperature rise: 15ºC at rated current on 25ºC ambient. Operating temperature: From –40ºC to +85°C. D. Applications: 1. Common mode noise suppression of signal lines in high speed and high-density digital equipment, such as personal computers and peripherals. 2. Suitable for differential signal line such as USB2.0, IEEE1394 and LVDS, capable of high speed signal transmission without distortion due to its high coupling. Note: For “LEAD FREE” / “RoHS” parts, we add “-LF” / “-LFR” after the part number. SMD wire wound Common Mode Chip Inductor: P/N SCM2012F-I-series July 01, 2006. Page: 1 of 2 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: http://www.frontierusa.com SMD Wire Wound EMI Common Mode Chip—SCM2012F-I series E. Impedance curve: 10000 Common Mode 1000 900-I 121-I 670-I 371-I 261-I 181-I Impedance (ohm) 100 10 371-I 261-I 181-I 1 900-I 121-I 670-I Normal Mode 0.1 10 100 Frequency (MHz) 1000 Special specifications are available for customer’s requirement. SMD wire wound Common Mode Chip Inductor: P/N SCM2012F-I-series July 01, 2006. Page: 2 of 2