UMFT4222PROG-IC

Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 FTDI Chip UMFT4222PROG-IC FT4222 Programmer Module 1 Introduction The UMFT4222PROG-IC Programmer Module has been developed to aid programming OTP memory in the FT4222H. The internal OTP memory in the FT4222H is used to store USB Vendor ID (VID), Product ID (PID), device serial number, product description string and various other USB configuration descriptors. The UMFT4222PROG-IC Programmer Module is designed with the FTDI FT51. The FT51 downstream USB port is connected to the FT4222H programming socket. The user places the FT4222H DUT in the socket, starts the programming application on the host PC which controls the main power and the OTP program power to the FT4222H. When the FT4222H is programmed and verified, the application turns off the main power and OTP programming power for safe removal of the FT4222H from the socket. 1.1 Features  USB2.0 Full Speed compatible,  Standard USB MicroB receptacle.  Single USB power input, built-in DC-DC converter for 6.5 V OTP programming power and main operation power supply.  Quick and easy F4222H OTP data production programming – drop in the FT4222H IC to be programmed, the application controls the power supplies, programming and power off automatically.  Visual indicator for 6.5V programming voltage and USB bus power using LEDs Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or fa ilure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright © Future Technology Devices International Limited 1 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 2 Module Information 2.1 Driver Support  Microsoft Windows 10 and 10 - 64-bit  Microsoft Windows 8.1 and 8.1 - 64-bit  Microsoft Windows 8 and 8 - 64-bit  Microsoft Windows 7 and Windows 7 64-bit The drivers listed above are http://www.ftdichip.com/Drivers/D2XX.htm all available to download for free 2.2 Ordering Information The following Error! Not a valid bookmark self-reference. gives details of the available UMFT4222PROG-IC products Part Number Description UMFT4222PROG-IC-B FT4222H OTP memory programming module rev B Table 2-1 UMFT4222 Product Descriptions and Part Numbers Copyright © Future Technology Devices International Limited 2 from: Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 Table of Contents 1 Introduction .................................................................................. 1 1.1 Features ........................................................................................ 1 2 Module Information ........................................................ 2 2.1 Driver Support ............................................................................... 2 2.2 Ordering Information .................................................................... 2 3 Function Description ....................................................... 4 3.1 Connection with UMFT4222PROG-IC.............................................. 5 3.2 LED Indicators ............................................................................... 5 4 UMFT4222PROG-IC module connection and Mechanical Details ................................................................................. 6 5 Module PCB Circuit Schematic ......................................... 7 6 Contact Information ...................................................... 10 Appendix A – References ................................................... 11 Document References ........................................................................ 11 Acronyms and Abbreviations .............................................................. 11 Appendix B –List of Figures and Tables .............................. 12 List of Figures .................................................................................... 12 List of Tables ...................................................................................... 12 Appendix C - Revision History ............................................ 13 Copyright © Future Technology Devices International Limited 3 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 3 Function Description The UMFT4222 Programmer IC Module (UMFT4222PROG-IC) is designed for production programming the FT4222H OTP memory. This module is designed with the FTDI FT51 chip. The FT51 built-in hub downstream port connects the FT4222H DUT to the host PC, while the FT51 built-in USB function manages the functional and OTP programming power (VPP) supplies to the FT4222H socket. The operation to program the FT4222H with UMFT4222PROG-IC is as follows:     Connect the module to the host PC - the UMFT4222H-IC is in standby mode and the power switch is turned off. Place a FT4222H DUT in the socket Close the socket cover. Run the free FTDI programming utility, FT_PROG, to update the FT4222H OTP data. When FT_PROG finished the FT4222H OTP programming, the switch power should be turned off and restart a new IC programming. For more details about FT_PROG, please refer to the utilities section of the FTDI website. Figure 3-1 UMFT4222PROG-IC connection example Copyright © Future Technology Devices International Limited 4 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 3.1 Connection with UMFT4222PROG-IC The FT4222H supports +5V to +3.3V output from an integrated LDO regulator. Figure 3-2 Example Function block of FT4222H integrated LDO regulator 3.2 LED Indicators The UMFT4222PROG-IC programmer has 1 LED. Table 3.1 describes the function of the LEDs. LED NAME Color D2 Red LED OFF No indication LED ON Burn in user data to FT4222 OTP block. Table 3-1 UMFT4222PROG-IC LED Indication Copyright © Future Technology Devices International Limited 5 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 4 UMFT4222PROG-IC module connection and Mechanical Details The following Figure 4-1 UMFT4222PROG-IC module layout shows the UMFT4222PROG-IC module layout. The module dimensions are 76.42mm x 44.48mm. 44.48mm 76.42mm Figure 4-1 UMFT4222PROG-IC module layout The following Table 4-1 UMFT4222PROG UMFT4222PROG-IC module. shows the module signals for these signals on the Pin No. Name Type Description SW1 VBUS PWR Control U3 Main Power TP5 DP_VBUS PWR Support U3 Main Power TP1,TP7 GND PWR Ground TP4 VPP PWR 6.5V Voltage supply Table 4-1 UMFT4222PROG module Connections (numbers refer to pad numbers on the PCB) Copyright © Future Technology Devices International Limited 6 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 5 Module PCB Circuit Schematic The circuit schematics for the small electronic board, utilising the FTDI FT51, are shown in Error! Reference source not found.. Copyright © Future Technology Devices International Limited 7 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 Figure 5-1 Circuit Schematic of UMFT4222PROG-IC Copyright © Future Technology Devices International Limited 8 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 Figure 5-2 Circuit Schematic of UMFT4222PROG-IC Copyright © Future Technology Devices International Limited 9 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 6 Contact Information Head Office – Glasgow, UK Branch Office – Tigard, Oregon, USA Future Technology Devices International Limited Unit 1, 2 Seaward Place, Centurion Business Park Glasgow G41 1HH United Kingdom Tel: +44 (0) 141 429 2777 Fax: +44 (0) 141 429 2758 Future Technology Devices International Limited (USA) 7130 SW Fir Loop Tigard, OR 97223-8160 USA Tel: +1 (503) 547 0988 Fax: +1 (503) 547 0987 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-mail (Sales) E-mail (Support) E-mail (General Enquiries) sales1@ftdichip.com support1@ftdichip.com admin1@ftdichip.com us.sales@ftdichip.com us.support@ftdichip.com us.admin@ftdichip.com Branch Office – Taipei, Taiwan Branch Office – Shanghai, China Future Technology Devices International Limited (Taiwan) 2F, No. 516, Sec. 1, NeiHu Road Taipei 114 Taiwan , R.O.C. Tel: +886 (0) 2 8797 1330 Fax: +886 (0) 2 8791 3576 Future Technology Devices International Limited (China) Room 1103, No. 666 West Huaihai Road, Shanghai, 200052 China Tel: +86 21 62351596 Fax: +86 21 62351595 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-mail (Sales) E-mail (Support) E-mail (General Enquiries) tw.sales1@ftdichip.com tw.support1@ftdichip.com tw.admin1@ftdichip.com cn.sales@ftdichip.com cn.support@ftdichip.com cn.admin@ftdichip.com Web Site http://ftdichip.com Distributor and Sales Representatives Please visit the Sales Network page of the FTDI Web site for the contact details of our distributor(s) and sales representative(s) in your country. System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology Devices International Ltd (FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested FTDI devices and other materials) is provided for reference only. While FTDI has taken care to assure it is accurate, this information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any applications assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold har mless FTDI from any and all damages, claims, suits or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor an y part of the information contained in, or the product described in this document, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Copyright © Future Technology Devices International Limited 10 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 Appendix A – References Document References FT4222H Datasheet Acronyms and Abbreviations Terms Description DUT Device Under Test IC Integrated Circuit LED Light Emitting Diode OTP One Time Programmable USB Universal Serial Bus Copyright © Future Technology Devices International Limited 11 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 Appendix B –List of Figures and Tables List of Figures Figure 3-1 UMFT4222PROG-IC connection example ........................................................................... 4 Figure 3-2 Example Function block of FT4222H integrated LDO regulator ............................................. 5 Figure 4-1 UMFT4222PROG-IC module layout ................................................................................... 6 Figure 5-1 Circuit Schematic of UMFT4222PROG-IC .......................................................................... 8 Figure 5-2 Circuit Schematic of UMFT4222PROG-IC .......................................................................... 9 List of Tables Table 2-1 UMFT4222 Product Descriptions and Part Numbers ............................................................. 2 Table 3-1 UMFT4222PROG-IC LED Indication ................................................................................... 5 Table 4-1 UMFT4222PROG module Connections (numbers refer to pad numbers on the PCB) ................. 6 Copyright © Future Technology Devices International Limited 12 Datasheet UMFT4222 PROGRAMMER-IC MODULE Version 1.2 Document Reference No.: FT_001132 Clearance No.: FTDI#427 Appendix C - Revision History Document Title: UMFT4222 Programmer-IC Module Datasheet Document Reference No.: FT_001132 Clearance No.: FTDI#427 Product Page: http://www.ftdichip.com/FTProducts.html Document Feedback: DS_UMFT4222PROG-IC Revision Changes Date 1.0 Initial Release 2014-12-03 1.1 Updated Ordering Information 2016-06-06 1.2 Updated Ordering procedures information & programming Copyright © Future Technology Devices International Limited 2017-06-27 13