1MBI3600U4D-120

1MBI3600U4D-120 IGBT MODULE (U series) 1200V / 3600A / 1 in one package Features High speed switching Voltage drive Low Inductance module structure IGBT Modules Applications Inverter for Motor Drive AC and DC Servo Drive Amplifier Uninterruptible Power Supply Industrial machines, such as Welding machines Maximum Ratings and Characteristics Absolute Maximum Ratings (at Tc=25°C unless otherwise specified) Items Collector-Emitter voltage Gate-Emitter voltage Symbols VCES VGES Ic Collector current Ic pulse Conditions Maximum ratings 1200 ±20 4800 3600 9600 7200 3600 7200 18650 150 -40 to +125 2500 5.75 10 2.5 Units V V Continuous 1ms Tc=25°C Tc=80°C Tc=25°C Tc=80°C A -Ic -Ic pulse 1ms Collector power dissipation Pc 1 device Junction temperature Tj Storage temperature Tstg Isolation voltage Between terminal and copper base (*1) Viso AC : 1min. Mounting (*2) Screw torque Main Terminals (*2) Sense Terminals (*2) W °C °C VAC N·m Note *1: All terminals should be connected together when isolation test will be done. Note *2: Recommendable value : Mounting : 4.25-5.75 N·m (M6), Main Terminal : 8-10 N·m (M8), Sense Terminal : 1.7-2.5 N·m (M4) Electrical characteristics (at Tj= 25°C unless otherwise specified) Items Zero gate voltage collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Collector-Emitter saturation voltage Input capacitance Turn-on time Turn-off time Symbols ICES IGES VGE (th) VCE (sat) (main terminal) VCE (sat) (chip) Cies ton tr toff tf VF (main terminal) VF (chip) trr R lead Conditions VGE = 0V, VCE = 1200V VCE = 0V, VGE = ±20V VCE = 20V, IC = 3600mA VGE = 15V IC = 3600A VGE Tj=25°C Tj=125°C Tj=25°C Tj=125°C = 0V, VCE = 10V, f = 1MHz Characteristics min. typ. max. 1.0 4800 5.5 6.5 7.5 2.22 2.42 2.42 1.90 2.05 2.10 403 0.90 0.50 0.80 0.20 1.97 2.17 2.07 1.65 1.80 1.75 0.35 0.089 Characteristics min. typ. max. 0.0067 0.011 0.006 Units mA nA V V nF µs VCC = 600V, IC = 3600A VGE = ±15V, Tj = 125°C Rgon = 0.6Ω, Rgoff = 0.27Ω VGE = 0V IF = 3600A IF = 3600A Tj=25°C Tj=125°C Tj=25°C Tj=125°C Forward on voltage Reverse recovery time Lead resistance, terminal-chip V µs mΩ Thermal resistance characteristics Items Thermal resistance (1device) Contact thermal resistance (1device) Symbols Rth(j-c) Rth(c-f) Conditions IGBT FWD with Thermal Compound (*3) Units °C/W Note *3: This is the value which is defined mounting on the additional cooling fin with thermal compound. 1 1MBI3600U4D-120 Characteristics (Representative) Collector current vs. Collector-Emitter voltage (typ.) Tj=25°C ,chip VGE=20V 15V 12V IGBT Modules Tj= 125°C, chip 8000 7000 VGE=20V 15V 12V 8000 7000 Collector current : Ic [A] Collector current : Ic [A] 6000 5000 4000 3000 2000 1000 0 0.0 1.0 2.0 3.0 4.0 5.0 Collector-Emitter voltage : VCE [V] 8V 10V 6000 5000 4000 3000 2000 1000 0 0.0 1.0 2.0 3.0 4.0 5.0 Collector-Emitter voltage : VCE [V] 8V 10V 8000 7000 Collector-Emitter voltage vs. Gate-Emitter voltage (typ.) VGE=+15V,chip Collector - Emitter voltage : VCE [ V ] Tj=25°C Tj=125°C 10 Collector-Emitter voltage vs. Gate-Emitter voltage (typ.) Tj=25°C ,chip Collector current : Ic [A] 6000 5000 4000 3000 2000 1000 0 0.0 1.0 2.0 3.0 4.0 8 6 4 Ic=7200A Ic=3600A Ic=1800A 2 0 5 10 15 20 25 Collector-Emitter voltage : VCE [V] Gate - Emitter voltage : VGE [ V ] 1000 Capacitance vs. Collector-Emitter voltage (typ.) VGE=0V, f= 1MHz, Tj= 25°C Collector-Emitter voltage : VCE [V] Cies 1000 800 VCE Dynamic Gate charge (typ.) Tj= 25°C VGE 25 Capacitance : Cies, Coes, Cres [ nF ] 100 Cres Coes 10 600 400 200 0 15 10 5 0 0 3000 6000 9000 12000 15000 1 0 10 20 Collector-Emitter voltage : VCE [V] 30 18000 Gate charge : Qg [ nC ] 2 Gate-Emitter voltage : VGE [V] 20 1MBI3600U4D-120 IGBT Modules Vcc=600V, VGE=±15V, Rgon=0.6Ω, Rgoff=0.27Ω, Tj= 125°C 1.2 ton Switching time vs. Collector current (typ.) Switching time vs. Gate resistance (typ.) 6.0 Vcc=600V, Ic=3600A,VGE=±15V, Tj=125°C Switching time : ton, tr, toff, tf [ us ] Switching time : ton, tr, toff, tf [ us ] ton 5.0 4.0 3.0 2.0 1.0 0.0 tf 0 1 2 3 4 5 6 tr toff 1.0 0.8 0.6 0.4 0.2 0.0 0 1000 2000 3000 4000 5000 6000 Collector current : Ic [ A ] tf toff tr Gate resistance : Rg [ Ω ] Vcc=600V, VGE=±15V, Rgon=0.6Ω, Rgoff=0.27Ω, Tj= 125°C 1200 Switching loss vs. Collector current (typ.) Switching loss vs. Gate resistance (typ.) 3500 Vcc=600V, Ic=3600A,VGE=±15V, Tj= 125°C Eon Switching loss : Eon, Eoff, Err [ mJ/pulse ] Switching loss : Eon, Eoff, Err [ mJ/pulse ] Eoff 1000 800 600 400 200 0 0 1000 2000 3000 4000 5000 6000 Collector current : Ic [ A ] , Forward current : IF [ A ] Eon Err 3000 2500 2000 1500 1000 500 0 0 1 3 4 2 Gate resistance : Rg [ Ω ] 5 6 Err Eoff Reverse bias safe operating area (max.) ± VGE=15V ,Tj = 125°C / chip 8000 7000 Collector current : Ic [ A ] 6000 5000 4000 3000 2000 1000 0 0 200 400 600 800 1000 1200 1400 Collector - Emitter voltage : VCE [ V ] 3 1MBI3600U4D-120 IGBT Modules 8000 7000 Forward current vs. Forward on voltage (typ.) chip Tj=25°C Tj=125°C 3600 Vcc=600V, VGE=±15V, Rgon=0.6Ω, Tj=125°C Irr Reverse recovery characteristics (typ.) 1.8 1.6 Reverse recovery current : Irr [ A ] 3200 2800 2400 2000 1600 1200 800 400 0 0 1200 2400 3600 Forward current : IF [ A ] 6000 5000 4000 3000 2000 1000 0 0.0 1.0 2.0 3.0 4.0 Forward on voltage : VF [ V ] 1.2 1.0 0.8 trr 0.6 0.4 0.2 0.0 4800 6000 Forward current : IF [ A ] Transient thermal resistance (max.) 0.1000 Thermal resistanse : Rth(j-c) [ °C/W ] FWD 0.0100 IGBT 0.0010 0.0001 0.001 0.010 0.100 1.000 Pulse width : Pw [ sec ] 4 Reverse recovery time : trr [us] 1.4 1MBI3600U4D-120 IGBT Modules Outline Drawings, mm Equivalent Circuit Schematic main collector C sense collector C C C gate G E E E main emitter sense emitter E 5 1MBI3600U4D-120 IGBT Modules WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of October 2008. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Device Technology Co., Ltd. is (or shall be deemed) granted. Fuji Electric Device Technology Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. Although Fuji Electric Device Technology Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Device Technology Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Device Technology Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Device Technology Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Device Technology Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Device Technology Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 6