2MBI300VJ-120-50

http://www.fujisemi.com 2MBI300VJ-120-50 IGBT MODULE (V series) 1200V / 300A / 2 in one package Features High speed switching Voltage drive Low Inductance module structure IGBT Modules Applications Inverter for Motor Drive AC and DC Servo Drive Amplifier Uninterruptible Power Supply Industrial machines, such as Welding machines Maximum Ratings and Characteristics Absolute Maximum Ratings (at Tc=25°C unless otherwise specified) Symbols VCES VGES Ic Ic pulse Collector current -Ic -Ic pulse Collector power dissipation Pc Junction temperature Tj Operating junction temperature (under switching conditions) Tjop Case temperature TC Storage temperature Tstg between terminal and copper base (*1) Isolation voltage Viso between thermistor and others (*2) Mounting (*3) Screw torque Terminals (*4) PC-Board (*5) Items Collector-Emitter voltage Gate-Emitter voltage Conditions Continuous 1ms 1ms 1 device Tc=80°C Tc=80°C Maximum ratings 1200 ±20 300 600 300 600 1595 175 150 125 -40 to +125 2500 3.5 4.5 0.6 Units V V A W °C VAC Nm Inverter AC : 1min. Note *1: All terminals should be connected together during the test. Note *2: Two thermistor terminals should be connected together, other terminals should be connected together and shorted to base plate during the test. Note *3: Recommendable value : 2.5-3.5 Nm (M5) Note *4: Recommendable value : 3.5-4.5 Nm (M6) Note *5: Recommendable value : 0.4-0.6 Nm (M2.5) Electrical characteristics (at Tj= 25°C unless otherwise specified) Items Zero gate voltage collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Symbols ICES IGES VGE (th) VCE (sat) (terminal) Conditions VGE = 0V, VCE = 1200V VCE = 0V, VGE = ±20V VCE = 20V, IC = 300mA VGE = 15V IC = 300A VCE = 10V, VGE = 0V, f = 1MHz VCC = 600V IC = 300A VGE = ±15V RG = 0.93Ω Tj=25°C Tj=125°C Tj=150°C Tj=25°C Tj=125°C Tj=150°C Collector-Emitter saturation voltage VCE (sat) (chip) Inverter Input capacitance Turn-on time Turn-off time Cies ton tr tr (i) toff tf VF (terminal) Forward on voltage VF (chip) Reverse recovery time Thermistor Resistance B value trr R B VGE = 0V IF = 300A IF = 300A T=25°C T=100°C T=25/50°C Tj=25°C Tj=125°C Tj=150°C Tj=25°C Tj=125°C Tj=150°C Characteristics min. typ. max. 3.0 600 6.0 6.5 7.0 2.15 2.60 2.45 2.50 1.75 2.20 2.05 2.10 27 550 1200 180 600 120 1050 2000 110 350 2.10 2.55 2.25 2.20 1.70 2.15 1.85 1.80 200 600 5000 465 495 520 3305 3375 3450 Characteristics min. typ. max. 0.094 0.150 0.0167 - Units mA nA V V nF nsec V nsec Ω K Thermal resistance characteristics Items Thermal resistance (1device) Contact thermal resistance (1device) (*6) Symbols Rth(j-c) Rth(c-f) Conditions Inverter IGBT Inverter FWD with Thermal Compound Units °C/W Note *6: This is the value which is defined mounting on the additional cooling fin with thermal compound. 1 2MBI300VJ-120-50 Characteristics (Representative) [INVERTER] Collector current vs. Collector-Emitter voltage (typ.) Tj= 25°C / chip 700 600 Collector current: Ic [A] 500 400 300 200 100 0 0 1 2 3 4 5 Collector-Emitter voltage: VCE [V] 10V VGE=20V15V 12V Collector current: Ic [A] IGBT Modules http://www.fujisemi.com [INVERTER] Collector current vs. Collector-Emitter voltage (typ.) Tj= 150°C / chip 700 600 500 400 300 200 100 0 0 1 2 3 4 5 Collector-Emitter voltage: VCE [V] 8V 10V VGE= 20V 15V 12V 8V [INVERTER] Collector current vs. Collector-Emitter voltage (typ.) VGE= 15V / chip 700 600 Collector Current: Ic [A] 500 400 300 200 100 0 0 1 2 3 4 5 Collector-Emitter Voltage: VCE [V] Collector-Emitter Voltage: VCE [V] Tj=25°C 125°C 150°C [INVERTER] Collector-Emitter voltage vs. Gate-Emitter v oltage (typ.) Tj= 25°C / chip 10 8 6 4 Ic=600A Ic=300A Ic=150A 5 10 15 20 25 2 0 Gate-Emitter Voltage: VGE [V] [INVERTER] Gate Capacitance vs. Collector-Emitter Voltage (typ.) VGE= 0V, ƒ= 1MHz, Tj= 25°C Gate Capacitance: Cies, Coes, Cres [nF] Collector-Emitter voltage: VCE [200V/div] Gate-Emitter voltage: VGE [5V/div] 100 [INVERTER] Dynamic Gate Charge (typ.) Vcc=600V, Ic=300A, Tj= 25°C Cies *** 10 VGE VCE Cres Coes 1 0 10 20 30 0 500 1000 1500 2000 2500 3000 3500 Gate charge: Qg [nC] Collector-Emitter voltage: VCE [V] 2 2MBI300VJ-120-50 IGBT Modules http://www.fujisemi.com [INVERTER] Switching time vs. Collector current (typ.) Vcc=600V, VGE=±15V, Rg=0.93Ω, Tj=25°C 10000 Switching time: ton, tr, toff, tf [nsec] Switching time: ton, tr, toff, tf [nsec] [INVERTER] Switching time vs. Collector current (typ.) Vcc=600V, VGE=±15V, Rg=0.93Ω, Tj=125°C, 150°C 10000 Tj=125oC Tj=150oC 1000 toff ton tr 100 tf 1000 toff ton tr 100 tf 10 0 100 200 300 400 500 600 700 10 0 100 200 300 400 500 600 700 Collector current: Ic [A] Collector current: Ic [A] [INVERTER] Switching time vs. Gate resistance (typ.) Vcc=600V, Ic=300A, VGE=±15V, Tj=125°C, 150°C Switching loss: Eon, Eoff, Err [mJ/pulse] 1 0000 Switching time: ton, tr, toff, tf [nsec] Tj=125oC Tj=150oC 1000 toff ton tr [INVERTER] Switching loss vs. Collector current (typ.) Vcc=600, VGE=±15V, Rg=0.93Ω, Tj=125°C, 150°C 100 80 60 40 Err 20 Eon 0 0 100 200 300 400 500 600 700 Tj=125oC Tj=150oC Eoff tf 100 10 0.1 1 10 100 Gate resistance: Rg [Ω] Collector current: Ic [A] [INVERTER] Switching loss vs. Gate resistance (typ.) Vcc=600V, Ic=300A, VGE=±15V, Tj=125°C, 150°C Switching loss: Eon, Eoff, Err [mJ/pulse] 150 Tj=125oC Tj=150oC 100 Eon Collector current: Ic [A] [INVERTER] Reverse bias safe operating area (max.) +VGE=15V, -VGE=15V, Rg=0.93Ω, Tj=150°C 800 700 600 500 400 300 200 100 0 50 Eoff Err 0 0 1 10 100 0 500 1000 1500 Gate resistance: Rg [Ω] Collector-Emitter voltage: VCE [V] 3 2MBI300VJ-120-50 IGBT Modules http://www.fujisemi.com [INVERTER] Forward Current vs. Forward Voltage (typ.) chip 700 600 Forward current: IF [A] 500 400 300 200 100 0 0 1 2 3 Forward on voltage: VF [V] 150°C 125°C Tj=25°C Reverse recovery current: Irr [A] Reverse recovery time: trr [nsec] [INVERTER] Reverse Recovery Characteristics (typ.) Vcc=600V, VGE=±15V, Rg=0.93Ω, Tj=25°C 10000 1000 Irr 100 trr 10 0 100 200 300 400 500 600 700 Forward current: IF [A] [INVERTER] Reverse Recovery Characteristics (typ.) Vcc=600V, VGE=±15V, Rg=0.93Ω, Tj=125°C, 150°C Tj=125oC Tj=150oC 1000 Irr trr 100 Thermal resistanse: Rth(j-c) [°C/W] *** 10000 Reverse recovery current: Irr [A] Reverse recovery time: trr [nsec] Transient Thermal Resistance (max.) 1 FWD 0.1 IGBT 0.01 10 0 100 200 300 400 500 600 700 Forward current: IF [A] 0.001 0.001 0.01 0.1 1 Pulse Width : Pw [sec] [THERMISTOR] Temperature characteristic (typ.) 100 Resistance : R [kΩ] 10 1 0.1 -60 -40 -20 0 20 40 60 80 100 120 140 160 Temperature [°C] 4 2MBI300VJ-120-50 IGBT Modules http://www.fujisemi.com Outline Drawings, mm Equivalent Circuit Schematic [ Inverter ] [ Thermistor ] + CX1 T1 T2 G1.1 EX1.1 GND G1.2 EX1.2 G1.3 EX1.3 G2.1 Cu-Base EX2.1 G2.2 EX2.2 G2.3 EX2.3 5 2MBI300VJ-120-50 IGBT Modules http://www.fujisemi.com WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. Although Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 6