6MBI100VW-060-50

6MBI100VW-060-50 IGBT MODULE (V series) 600V / 100A / 6 in one package Features Compact Package P.C.Board Mount Low VCE (sat) IGBT Modules Applications Inverter for Motor Drive AC and DC Servo Drive Amplifier Uninterruptible Power Supply Industrial machines, such as welding machines Maximum Ratings and Characteristics Absolute Maximum Ratings (at Tc=25°C unless otherwise specified) Items Collector-Emitter voltage Gate-Emitter voltage Inverter Collector current Symbols VCES VGES Ic Icp -Ic -Ic pulse Pc Tj Tjop Tc Tstg AC : 1min. M5 Conditions Maximum ratings 600 ±20 100 200 100 200 335 175 150 125 -40 to +125 2500 3.5 VAC Nm Units V V A W Continuous 1ms 1ms 1 device Tc=80°C Tc=80°C Collector power dissipation Junction temperature Operating junciton temperature (under switching conditions) Case temperature Storage temperature Isolation voltage Screw torque °C between terminal and copper base (*1) Viso between thermistor and others (*2) Mounting (*3) - Note *1: All terminals should be connected together during the test. Note *2: Two thermistor terminals should be connected together, other terminals should be connected together and shorted to base plate during the test. Note *3: Recommendable value : 2.5-3.5 Nm (M5) 1 6MBI100VW-060-50 Electrical characteristics (at Tj= 25°C unless otherwise specified) Items Zero gate voltage collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Symbols I CES I GES VGE (th) VCE (sat) (terminal) Collector-Emitter saturation voltage VCE (sat) (chip) Inverter Input capacitance Turn-on time Turn-off time Cies ton tr tr (i) toff tf VF (terminal) Forward on voltage VF (chip) Reverse recovery time Thermistor Resistance B value trr R B I F = 100A I F = ±20 T = 25°C T = 100°C T = 25 / 50°C Conditions VGE = 0V, VCE = 600V VGE = 0V, VGE = ±20V VCE = 20V, I C = 100mA Tj=25°C Tj=125°C Tj=150°C Tj=25°C VGE = 15V Tj=125°C I C = 100A Tj=150°C VCE = 10V, VGE = 0V, f = 1MHz VGE = 15V I C = 100A VCC = 300V I C = 100A VGE = +15 / -15V RG = 13Ω Tj=25°C Tj=125°C Tj=150°C Tj=25°C Tj=125°C Tj=150°C IGBT Modules I F = 100A Characteristics min. typ. max. 1.0 200 6.2 6.7 7.2 2.05 2.50 2.35 2.55 1.60 2.05 1.90 2.10 6.4 0.39 1.20 0.09 0.60 0.03 0.53 1.00 0.06 0.30 2.05 2.50 1.95 1.95 1.60 2.05 1.50 1.47 0.35 5000 465 495 520 3305 3375 3450 Units mA nA V V nF µs V µs Ω K Thermal resistance characteristics Items Thermal resistance (1device) Contact thermal resistance (1device) (*4) Symbols Rth(j-c) Rth(c-f) Conditions Inverter IGBT Inverter FWD with Thermal Compound Characteristics min. typ. max. 0.45 0.80 0.05 Units °C/W Note *4: This is the value which is defined mounting on the additional cooling fin with thermal compound. Equivalent Circuit Schematic [ Inverter ] [ Thermistor ] 2 6MBI100VW-060-50 Characteristics (Representative) [ Inverter ] Collector current vs. Collector-Emitter voltage (typ.) Tj= 25oC / chip 200 VGE=20V 200 12V IGBT Modules [ Inverter ] Collector current vs. Collector-Emitter voltage (typ.) Tj= 150oC / chip VGE=20V 15V 12V Collector current: IC [A] Collector current: IC [A] 150 15V 10V 150 10V 100 100 50 8V 0 0 1 2 3 4 5 50 8V 0 0 1 2 3 4 5 Collector-Emitter voltage: VCE [V] [ Inverter ] Collector current vs. Collector-Emitter voltage (typ.) VGE =15V / chip 200 Collector-Emitter voltage: VCE[V] [ Inverter ] Collector-Emitter voltage vs. Gate-Emitter voltage (typ.) Tj= 25oC / chip 8 Collector current: IC [A] 150 125°C Collector - Emitter voltage: VCE [V] Tj=25°C 150°C 6 100 4 50 2 Ic=200A Ic=100A Ic= 50A 0 0 1 2 3 4 5 0 5 10 15 20 25 Collector-Emitter voltage: VCE [V] [ Inverter ] Capacitance vs. Collector-Emitter voltage (typ.) VGE =0V, f= 1MHz, Tj= 25oC 100.0 Gate - Emitter voltage: VGE [V] [ Inverter ] Dynamic gate charge (typ.) Vcc=300V, Ic=100A, Tj= 25°C Collector - Emitter voltage: VCE [200V/div] Gate - Emitter voltage: VGE [5V/div] Capacitance: Cies, Coes, Cres [nF] 10.0 Cies VGE 1. 0 Coes Cres VCE 0. 1 0 10 20 30 40 0 200 400 600 800 Collector - Emitter voltage: VCE [V] Gate charge: Qg [nC] 3 6MBI100VW-060-50 IGBT Modules [ Inverter ] Switching time vs. Collector current (typ.) Vcc=300V, VGE=±15V, Rg=13Ω, Tj= 125°C Switching time : ton, tr, toff, tf [ nsec ] Switching time : ton, tr, toff, tf [ nsec ] 10000 10000 [ Inverter ] Switching time vs. Collector current (typ.) Vcc=300V, VGE=±15V, Rg=13Ω, Tj= 150°C 1000 t of f tr ton 1000 ton tr t of f 100 tf 100 tf 10 0 50 100 150 200 250 300 10 0 50 100 150 200 250 300 Collector current: IC [A] [ Inverter ] Switching time vs. gate resistance (typ.) Vcc=300V, Ic=100A, VGE=±15V, Tj= 125°C Switching loss : Eon, Eoff, Err [mJ/pulse ] Switching time : ton, tr, toff, tf [ nsec ] 10000 t of f ton tr 1000 8 7 6 5 4 3 2 1 0 0 Collector current: IC [A] [ Inverter ] Switching loss vs. Collector current (typ.) Vcc=300V，VGE=±15V，Rg=13Ω Eon(150°C) Eon(125°C) Eoff(150°C) Eoff(125°C) 100 tf Err(150°C) Err(125°C) 50 100 150 200 10 1. 0 10.0 100.0 1000.0 Gate resistance : Rg [Ω] [ Inverter ] Switching loss vs. gate resistance (typ.) Vcc=300V, Ic=100A, VGE=±15V Switching loss : Eon, Eoff, Err [mJ/pulse ] 30 Eoff(150°C) Eoff(125°C) 20 Collector current: IC [A] [ Inverter ] Reverse bias safe operating area (max.) +VGE=15V,-VGE = 13Ω ,Tj