6MBI50VW-060-50
IGBT MODULE (V series) 600V / 50A / 6 in one package
Features
Compact Package P.C.Board Mount Low VCE (sat)
IGBT Modules
Applications
Inverter for Motor Drive AC and DC Servo Drive Amplifier Uninterruptible Power Supply Industrial machines, such as welding machines
Maximum Ratings and Characteristics
Absolute Maximum Ratings (at Tc=25°C unless otherwise specified)
Items Collector-Emitter voltage Gate-Emitter voltage Inverter Collector current Symbols VCES VGES Ic Icp -Ic -Ic pulse Pc Tj Tjop Tc Tstg AC : 1min. M5 Conditions Maximum ratings 600 ±20 50 100 50 100 200 175 150 125 -40 to +125 2500 3.5 VAC Nm Units V V A W
Continuous 1ms 1ms 1 device
Tc=80°C Tc=80°C
Collector power dissipation Junction temperature Operating junciton temperature (under switching conditions) Case temperature Storage temperature Isolation voltage Screw torque
°C
between terminal and copper base (*1) Viso between thermistor and others (*2) Mounting (*3) -
Note *1: All terminals should be connected together during the test. Note *2: Two thermistor terminals should be connected together, other terminals should be connected together and shorted to base plate during the test. Note *3: Recommendable value : 2.5-3.5 Nm (M5)
1
6MBI50VW-060-50
Electrical characteristics (at Tj= 25°C unless otherwise specified)
Items Zero gate voltage collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Symbols I CES I GES VGE (th) VCE (sat) (terminal) Collector-Emitter saturation voltage VCE (sat) (chip) Inverter Input capacitance Turn-on time Turn-off time Cies ton tr tr (i) toff tf VF (terminal) Forward on voltage VF (chip) Reverse recovery time Thermistor Resistance B value trr R B I F = 50A I F = ±20 T = 25°C T = 100°C T = 25 / 50°C Conditions VGE = 0V, VCE = 600V VGE = 0V, VGE = ±20V VCE = 20V, I C = 50mA Tj=25°C Tj=125°C Tj=150°C Tj=25°C VGE = 15V Tj=125°C I C = 50A Tj=150°C VCE = 10V, VGE = 0V, f = 1MHz VGE = 15V I C = 50A VCC = 300V I C = 50A VGE = +15 / -15V RG = 43Ω Tj=25°C Tj=125°C Tj=150°C Tj=25°C Tj=125°C Tj=150°C
IGBT Modules
I F = 50A
Characteristics min. typ. max. 1.0 200 6.2 6.7 7.2 1.90 2.35 2.20 2.40 1.60 2.05 1.90 2.10 3.3 0.39 1.20 0.09 0.60 0.03 0.53 1.00 0.06 0.30 1.90 2.35 1.80 1.80 1.60 2.05 1.50 1.47 0.35 5000 465 495 520 3305 3375 3450
Units mA nA V
V
nF
µs
V
µs Ω K
Thermal resistance characteristics
Items Thermal resistance (1device) Contact thermal resistance (1device) (*4) Symbols Rth(j-c) Rth(c-f) Conditions Inverter IGBT Inverter FWD with Thermal Compound Characteristics min. typ. max. 0.71 1.15 0.05 Units °C/W
Note *4: This is the value which is defined mounting on the additional cooling fin with thermal compound.
Equivalent Circuit Schematic
[ Inverter ] [ Thermistor ]
2
6MBI50VW-060-50
Characteristics (Representative)
[ Inverter ] Collector current vs. Collector-Emitter voltage (typ.) Tj= 25oC / chip
100 VGE=20V 100 12V
IGBT Modules
[ Inverter ] Collector current vs. Collector-Emitter voltage (typ.) Tj= 150oC / chip
VGE=20V 15V 12V
Collector current: IC [A]
Collector current: IC [A]
75
15V 10V
75 10V 50
50
25 8V 0 0 1 2 3 4 5
25
8V
0 0 1 2 3 4 5
Collector-Emitter voltage: VCE[V] [ Inverter ] Collector current vs. Collector-Emitter voltage (typ.) VGE =15V / chip
100 150°C 125°C
Collector-Emitter voltage: VCE [V] [ Inverter ] Collector-Emitter voltage vs. Gate-Emitter voltage (typ.) Tj= 25oC / chip
8
Collector current: IC [A]
75
Collector - Emitter voltage : VCE [V]
Tj=25°C
6
50
4
25
2
Ic=100A Ic=50A Ic= 25A
0 0 1 2 3 4 5
0 5 10 15 20 25
Collector-Emitter voltage: VCE[V] [ Inverter ] Capacitance vs. Collector-Emitter voltage (typ.) VGE=0V, f= 1MHz, Tj= 25oC
100.0
Gate - Emitter voltage: VGE [V] [ Inverter ] Dynamic gate charge (typ.) Vcc=300V, Ic=50A, Tj= 25°C Collector - Emitter voltage: VCE [200V/div] Gate - Emitter voltage: VGE [5V/div]
Capacitance: Cies, Coes, Cres [nF]
10.0 Cies
VGE
1. 0 Coes Cres 0. 1 0 10 20 30 40
VCE
0
100
200
300
400
Collector - Emitter voltage: VCE [V]
Gate charge: Qg [nC]
3
6MBI50VW-060-50
IGBT Modules
[ Inverter ] Switching time vs. Collector current (typ.) Vcc=300V, VGE=±15V, Rg=43Ω, Tj= 125°C Switching time : ton, tr, toff, tf [ nsec ]
10000
[ Inverter ] Switching time vs. Collector current (typ.) Vcc=300V, VGE=±15V, Rg=43Ω, Tj= 150°C
10000
1000
Switching time : ton, tr, toff, tf [ nsec ]
t of f tr
ton
1000
ton tr t of f
100 tf
100 tf
10 0 50 100 150
10 0
Collector current: IC [A] [ Inverter ] Switching time vs. gate resistance (typ.) Vcc=300V, Ic=50A, VGE=±15V, Tj= 125°C Switching loss : Eon, Eoff, Err [mJ/pulse ] Switching time : ton, tr, toff, tf [ nsec ]
10000 t of f ton tr 1000 4
Collector current: IC [A]
50
100
150
[ Inverter ] Switching loss vs. Collector current (typ.) Vcc=300V, VGE=±15V, Rg=43Ω
Eon(150°C) Eon(125°C) Eoff(150°C) Eoff(125°C)
3
2
100
tf
1
Err(150°C) Err(125°C) 0 25 50 75 100
10 10.0
0
100.0
1000.0
Gate resistance : Rg [Ω] [ Inverter ] Switching loss vs. gate resistance (typ.) Vcc=300V, Ic=50A, VGE=±15V Switching loss : Eon, Eoff, Err [mJ/pulse ]
15 Eoff(150°C) Eoff(125°C) 10
Collector current: IC [A] [ Inverter ] Reverse bias safe operating area (max.) +VGE=15V,-VGE = 43Ω ,Tj
很抱歉,暂时无法提供与“6MBI50VW-060-50”相匹配的价格&库存,您可以联系我们找货
免费人工找货