EDS8-49E

FCX SERIES FIELD INDICATOR DATA SHEET This is a field installation type moving-coil indicator which receives and indicates signal of 4 to 20 mA DC. It is employed when an indicator is to be installed separately from the transmitter. FXE SPECIFICATIONS Functional Specifications Measured input: 4 to 20mA DC (2-wire type) Internal impedance: Scale: Scale length: Environmental protection: Explosionproof structure: 3.5 Ω or less 0 to 100% linear scale or 0 to 100% square scale, actual scale Note: Double scale is unavailable. 50mm IEC IP67 and NEMA4X Intrinsic safety BASEEFA EExiaIICT4, T5(pending) Flameproofing JIS d2G4 Aluminum alloy Epoxy urethane double coating Silver (case cover is blue-silver) – 40 to +85°C For explosionproof units, ambient temperature must be within the limits specified by each standard. 100% RH or less Case material: Finish color: SCOPE OF DELIVERY Indicator and pipe mounting bracket (as specified) Ambient temperature: Ambient humidity: Storage temperature: Mass: Conduit connection: – 40 to +90°C Approx. 3.5kg CODE SYMBOLS 12345678 9 10 11 12 FXE S T V W 0001 - Description Conduit connection G1/2 1/2-14NPT Pg13.5 M20 x 1.5 G1/2, 1/2– 14NPT, Pg13.5 or M20 x 1.5 conduit, as specified External terminal: Input signal terminal x 2, ground terminal x 1, M4mm screw Mounting method: Mounting on 50A (2B) pipe or on wall Outer dimensions (H x W x D): 92 x 222 x 179mm B C D A B C K A B C Y B Scale 0 to 100% linear scale 0 to 100% square scale Actual scale Explosionproof structure General type (non-explosionproof) JIS flameproof (conduit seal type)(*) JIS flameproof (cable seal type)(*) BASEEFA Intrinsic safety Pipe mounting bracket Not provided Provided (steel) Provided (stainless steel) Stainless steel tag plate None Yes [Performance Specifications] Accuracy: ± 1.5 class Withstand voltage: Insulation resistance: 500V AC, 50/60 Hz, for 1 minute, to ground 100MΩ or more at 500V DC, to ground Note: *10th code B, C is only applicable for 4th codes. EDS8-49e Date Jan. 18, 2003 FXE OUTLINE DIAGRAM (Unit:mm) 1Mounting pipe JIS 50A(2B) U-bolt M8 Up φ92 55 Down Field indicator 4-φ9 holes 88 Clamp(only with flame proof type) 38 58 184 *Cable gland (for flame proof, cable seal type only) *"B"Conduit connection "A" Conduit connection 179 60 66 Details of "A" φ15 Details of "B" φ13 G E E G1/2 4th code S T V W E G1/2 1/2-14NPT Pg13.5 M20 × 1.5 F 17 16 8 16 G 8 5 4.5 5 70 120 17 Note: Asterisked(*) items are provided only with flameproof(cable seal type) type. φ11mm cable should be used. EXTERNAL CONNECTION DIAGRAM Case 1 FCX Transmitter + Power supply CKCKShort bar CK+ + Field indicator FXE CK+ Power supply CK+ Case 2 Field indicator FXE CK+ + FCX Transmitter Note: Maximum three(3) indicators in series can be connected to the transmitter terminals CK+,CK-. Note: Maximum three(3) indicators in series can be connected between the power supply and the transmitter. Caution on Safety *Before using this product, be sure to read its instruction manual in advance. Head Office 6-17, Sanbancho, Chiyoda-ku, Tokyo 102-0075, Japan http://www.fesys.co.jp/eng Sales Div. International Sales Dept. No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan Phone: 81-42-585-6201, 6202 Fax: 81-42-585-6187 http: //www.fic-net.jp/eng Information in this catalog is subject to change without notice. 164 φ92 70 Printed in Japan