EDS9-24A

FC SERIES PT TYPE DISTRIBUTOR (48mm width) DATA SHEET The FC series PT type distributor converts a current signal (4 to 20mA DC) from the transmitter into a voltage signal (1 to 5V DC ) then distributes the voltage signal to each receiver. In addition, the distributor is provided with built-in transmitter power supply. Its structure is plug-in style. PTL SPECIFICATIONS INPUT SPECIFICATION Input signal: 1 point Input type Input signal Input resistance Current 4 to 20mA DC 250Ω OUTPUT SPECIFICATION Output signal: 2 points Output type Output signal Voltage 1 to 5 V DC Allowable load re- 500k Ω o r over (reception, non-insulation) 15kΩ or over sistance (with output buffer) POWER SUPPLY Power supply: 24V DC (20 to 30V DC) 24V AC, +13%, –10%,(47 to 63Hz) 100V AC (85 to 132V AC / 47 to 63Hz) 200V AC (187 to 264V AC / 47 to 63Hz) as specified. Power consumption: Approx. 2W (at DC power) Approx. 6VA (at AC power) Reception only: Input/Output - Ground Non-insulation type: Input/Output•Power - Ground Non-insulation with buffer: Input/Output•Power - Ground Power insulation with buffer: Input/Output - Power - Ground Power I/O insulation with buffer: Input - Output - Power - Ground Ambient temperature effect: Less than ± 0.15% of full span/10°C Power regulation effect: Less than ± 0.1% of full span CODE SYMBOLS 12345678 OPERATION CONDITION Ambient temperature: 0 to 50°C Ambient humidity: Less than 90%RH (no condensation) Outline dimension (HxWxD): 96 x 52 x130mm Mass: Appox. 300g Housing: Plastic housing (color: black) Mounting method: Panel mounting or DIN rail mounting PLT2V 2 V A0 B1 C1 D1 E1 D2 E2 D3 E3 1 Input signal 4 to 20mA DC Output signal 1 to 5V DC Description CHARACTERISTICS Accuracy: Less than ± 0.1% of full span Response time: Less than 0.1 sec. (90% response) Dielectric strengh: 1500V AC, 1 min. (indicated below) Insolation resistance: 500V DC, 100MΩ or over (indicated below) Output system Reception only Non-insulation type Non-insulation with buffer Power insulation with buffer Power I/O insulation with buffer Power insulation with buffer Power I/O insulation with buffer Power insulation with buffer Power I/O insulation with buffer Power supply None 24V DC 24V DC 24V DC/ 24V AC (50/ 60Hz) 24V DC/24V AC (50/ 60Hz) 100V AC (50/60Hz) 100V AC (50/60Hz) 200V AC (50/60Hz) 200 V AC (50/60Hz) EDS9-24a Date Feb. 20, 1996 PTL FUNCTIONAL DIAGRAM 1. Reception only type 11 12 250Ω 31 Output 1 32 Transmitter (4 to 20mA DC) 41 21 42 22 34 Output 2 2. Non-insulation type 11 12 Power restric circuit 31 Output 1 32 41 Transmitter (4 to 20mA DC) 21 42 22 250Ω 43 Output 2 Power 44 34 3. Power insulation with buffer 11 12 Power restric circuit 31 Output 1 32 41 Transmitter (4 to 20mA DC) 21 42 22 Power circuit 250Ω 34 43 Output 2 Power 44 4. Power input/output insulation with buffer 11 12 Current limiting circuit Signal insulation circuit 31 Output 1 32 41 Output 2 42 Transmitter (4 to 20mA DC) 21 22 Power circuit 250Ω 34 43 Power 44 OUTLINE DIAGRAM (Unit: mm) Terminal screw M4 Main unit Terminal screw M2.5 (for transmission) 74 94 35 Terminal 48 52 100 130 2 Stopper Panel mounting DIN rail mounting 2-M4 DIN rail 40 52 Stopper PTL EXTERNAL CONNECTION DIAGRAM General (non-insulation type, power insulation type, power I/O insulation type) Reception only type + - + - 11 12 + 21 22 5 6 31 32 + OUTPUT 13 14 11 12 + 21 22 5 6 13 14 23 24 23 24 33 34 31 32 + OUTPUT 33 34 41 42 + OUTPUT 43 44 + POWER 41 42 + OUTPUT 43 44 RANGE OF DELIVERY Main unit and socket Caution on Safety *Before using this product, be sure to read its instruction manual in advance. Head Office Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo 141-0032, Japan http://www.fesys.co.jp/eng Instrumentation Div. International Sales Dept. No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan Phone: 81-42-585-6201, 6202 Fax: 81-42-585-6187 http://www.fic-net.jp/eng Information in this catalog is subject to change without notice. Printed in Japan