ESAC83-004R

http://www.fujisemi.com ESAC83-004R Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25˚C unless otherwise specified.) Item Repetitive peak surge reverse voltage Repetitive peak reverse voltage Average output current Non-repetitive forward surge current** Operating junction temperature Storage temperature Note* Out put current of center tap full wave connection. Note** Rating per element FUJI Diode Symbols VRSM VRRM Io IFSM Tj Tstg Conditions tw=500ns, duty=1/40 50Hz Square wave duty =1/2 Tc = 119˚C Sine wave, 10ms 1shot Ratings 48 40 20 * 120 150 -40 to +150 Units V V A A ˚C ˚C - Electrical characteristics Item Forward voltage*** Reverse current*** Thermal resistance Note*** Rating per element (at Ta=25˚C unless otherwise specified.) Symbols VF IR Rth(j-c) IF = 8A VR =VRRM Junction to case Conditions Maximum 0.55 15 1.5 Units V mA ˚C/W Mechanical characteristics Item Mounting torque Approximate mass Conditions Recommended torque Maximum 0.4 to 0.6 5.5 Units N•m g 1 ESAC83-004R Outline Drawings [mm] http://www.fujisemi.com FUJI Diode 2 ESAC83-004R http://www.fujisemi.com FUJI Diode Forward Characteristic (typ.) 100 Reverse Characteristic (typ.) 102 Tj=150℃ 10 Tj=125℃ 10 1 Tj=100℃ IF Forward Current (A) Tj=150℃ Tj=125℃ 1 Reverse Current (mA) IR 100 Tj=100℃ Tj=25℃ 10-1 Tj= 25℃ 0.1 10-2 0.01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 10-3 0 10 20 30 40 50 VR Reverse Voltage (V) VF Forward Voltage (V) Forward Power Dissipation (max.) 14 11 Reverse Power Dissipation (max.) 360° 12 10 360° VR α DC I0 λ 10 9 (W) Reverse Power Dissipation (W) 8 WF Forward Power Dissipation 7 8 Square wave λ=60° Square wave λ=120° Sine wave λ=180° Square wave λ=180° DC 6 5 α =180° 6 4 4 PR 3 2 2 1 Per 1element 0 0 2 4 6 8 10 0 0 5 10 15 20 25 30 35 40 45 Io Average Output Current (A) VR Reverse Voltage (V) 3 ESAC83-004R http://www.fujisemi.com FUJI Diode Current Derating (Io-Tc) (max.) 160 10000 Junction Capacitance Characteristic (typ.) 150 140 (°C) DC Junction Capacitance (pF) Cj 100 130 Case Temperature Sine wave λ=180° 120 Square wave λ=180° 1000 110 Square wave λ=120° Tc 360° Square wave λ=60° 90 I0 λ VR=20V 80 0 5 Io Average Output Current 10 15 20 (A) 25 30 100 1 10 λ :Conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection VR Reverse Voltage (V) Surge Capability (max.) 1000 IFSM Peak Half - Wave Current (A) 100 10 1 10 100 Number of Cycles at 50Hz 4 ESAC83-004R http://www.fujisemi.com FUJI Diode Transient Thermal Impedance (max.) 101 (°C/W) Rth j-c:1.5°C/W 100 Transient Thermal Impedance 10-1 10-2 10-3 10-2 10-1 100 101 102 t Time (sec) 5 ESAC83-004R http://www.fujisemi.com FUJI Diode WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. Although Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 6