http://www.fujisemi.com
ESAD83M-006RR
Schottky Barrier Diode
Maximum Rating and Characteristics
Maximum ratings (at Ta=25˚C unless otherwise specified.)
Item Repetitive peak reverse voltage Isolating voltage Average output current Non-repetitive forward surge current** Operating junction temperature Storage temperature
Note* Out put current of center tap full wave connection. Note** Rating per element
FUJI Diode
Symbols VRRM Viso Io IFSM Tj Tstg
Conditions Terminals-to-Case, AC.1min 50Hz Square wave duty =1/2 Tc = 106˚C Sine wave, 10ms 1shot
Ratings 60 1500 30 * 120 150 -40 to +150
Units V V A A ˚C ˚C
-
Electrical characteristics
Item Forward voltage*** Reverse current*** Thermal resistance
Note*** Rating per element
(at Ta=25˚C unless otherwise specified.)
Symbols VF IR Rth(j-c) Conditions IF = 12.5 A VR =VRRM Junction to case Maximum 0.58 20 1.7 Units V mA ˚C/W
Mechanical characteristics
Item Mounting torque Approximate mass Conditions Recommended torque Maximum 0.4 to 0.6 6 Units N•m g
1
ESAD83M-006RR
Outline Drawings [mm]
http://www.fujisemi.com
FUJI Diode
006
006
2
ESAD83M-006RR
http://www.fujisemi.com
FUJI Diode
Forward Characteristic (typ.)
100
Reverse Characteristic (typ.)
Tj=150℃
102
Tj=125℃
10
Reverse Current(mA)
101
Forward Current(A)
Tj=150℃ Tj=125℃ Tj=100℃
1
Tj=100℃
Tj=25℃
100
IF
IR
10-1
Tj=25℃
0.1
10-2
0.01 0.0
10-3
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0
10
20
30
40
50
60
70
VF
Forward Voltage(V)
VR
Reverse Voltage(V)
Forward Power Dissipation
22
(max.)
14
Reverse Power Dissipation (max.)
DC
20
360°
13 12
360° VR α
18
I0 λ
11
Forward Power Dissipation (W)
16
Dissipation(W) Power
10 9 8 7 6 5 4 3 α=180°
14 Square wave λ=60° 12 Square wave λ=120° Sine wave λ=180° Square wave λ=180° 8 DC
10
WF
4
2
2 Per 1element 0 0 2 4 6 8 10 12 14 16
1 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65
Io
Average Output Current(A)
PR
6
Reverse
VR
Reverse Voltage (V)
3
ESAD83M-006RR
http://www.fujisemi.com
FUJI Diode
Current Derating
160 155 150 145 140 135 130
(Io-Tc) (max.)
10000
Junction Capacitance Characteristic (typ.)
Case Temperature(℃)
120 115 110 105 100 95 Square wave λ=120° Sine wave λ=180° Square wave λ=180°
Junction Capacitance (pF) Cj
125
DC
1000
Tc
90 85 80 75 70 65 60 0 5 10 15 20 25 30 35 40 45
I0 λ VR=30V 360°
Square wave λ=60°
100 1 10 100
Io
Average Output Current(A)
λ:Conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection
VR
Reverse Voltage (V)
Surge Capability (max.)
1000
Peak Half - Wave Current(A) IFSM
100
10 1 10
Number of Cycles at 50Hz
4
ESAD83M-006RR
http://www.fujisemi.com
FUJI Diode
Transient Thermal Impedance (max.)
10
1
Transient Thermal Impedance (℃/W)
Rth j-c: 1.7 ℃/W
10
0
10
-1
10
-3
10
-2
10
-1
10
0
10
1
10
2
t
Time
(sec)
5
ESAD83M-006RR
http://www.fujisemi.com
FUJI Diode
WARNING
1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. Although Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein.
6
很抱歉,暂时无法提供与“ESAD83M-006RR”相匹配的价格&库存,您可以联系我们找货
免费人工找货