• 型  号
  • 产品描述
X3PM-001MPG图片

暂无图片

X3PM-001MPG

型  号:
X3PM-001MPG
大  小:
152.47KB 共4页
厂  商:
FUJIKURA[FujikuraLtd.]
主  页:
http://www.fujikura.co.jp/
功能介绍:
X3PM-001MPG - Pre-amplified/3V Excitation/Gauge - Fujikura Ltd.
推荐单价:

无报价

立即购买
Pre-amplified/3V Excitation/Gauge Features . . . . . 3V excitation, Battery operation available Volt level output On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Non-corrosive liquid measurable (X3PMC, X3HMC only) X3PM,X3HM Data sheet Applications . Industrial instrumentation . Pressure switch, Pneumatic device . Medical device Part number for ordering X3PM C - 050KP G R Terminal leads direction(See Outline Diagram) No mark : Rated pressure (Pa) Model X3PM X3HM Available pressure media No mark : Non-corrosive gas only C : Non-corrosive gas and liquid (Contact us about availability) Pressure type X3PM R : Pressure type G : Gauge (Positive pressure) GV : Gauge (Negative pressure) GW : Gauge (Bipolar pressure) Gauge pressure X3HM Model Package configuration Measurable pressure range (kPa) 100 100 0 100 0 50 0 100 0 200 0 1000 Dual-In-line-Package (DIP) Part number for ordering X3PM-100KPGWR X3PM-100KPGVR X3PM-050KPGR X3PM-100KPGR X3PM-200KPGR X3PM-001MPGR Horizontal pressure port DIP X3PM-100KPGW X3PM-100KPGV X3PM-050KPG X3PM-100KPG X3PM-200KPG X3PM-001MPG X3HM-100KPGWR X3HM-100KPGVR X3HM-050KPGR X3HM-100KPGR X3HM-200KPGR X3HM-001MPGR Specifications Model/Rated pressure 100KPGW 100KPGV 050KPG 100KPG 200KPG 001MPG Unit Recommended operating conditions Pressure type Gauge pressure 100 100 50 100 200 1000 Rated pressure 1.020 1.020 0.510 1.020 2.040 10.20 Measurable pressure range 100 100 0 100 0 50 0 100 0 200 0 1000 Pressure media 1 XFPM, XFHM : Non-corrosive gas only, XFPMC, XFHMC : Non-corrosive gas and liquid Excitation voltage 3.0 0.15 Absolute maximum rating 1.5times of rated pressure Maximum load pressure Twice of rated pressure Maximum excitation voltage 6 Operating temperature 10 80 Storage temperature 20 100 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=3.0V constant, Ambient temperature Ta=25 ) Current consumption less than 6 Output impedance less than 10 Source current less than 0.1 Sink current less than 1.0 Mechanical response time 2 (For the reference) Full scale span voltage 1.5 Offset voltage 1.2 0.5 0.075 Full scale span voltage 1.2 2.0 0.075 Accuracy 1.2 5.0 Note ; 1) Please consult us available when you choose the C models. 2) Excluding input voltage error. kPa kg/cm2 kPa VDC VDC RH mA mA mA msec V V V FS/0 50 1 Pre-amplified/3V Excitation/Gauge Outline dimensions X3PM,X3HM Data sheet unit (mm) X3PM 12 0.5 6 5 4 4 2.2 8 5 0.2 max 15 Pressure port 0.8 0.6 Vent hole 4.5 4 5 6 15.24(600mil) R1.5 3 C0.5 14 1 2 3 Terminal leads 3 2 1 Labelled faceplate 6.8 2.8 Recommended footprint for PCB 6- 0.9(Diameter of through holes) 2.54 2.54 6- 1.8(Diameter of lands) 1.2 60 15.2 unit (mm) unit (mm) X3PM-R 0.2 12 max 15 4 0.5 2.2 8 5 6 5 4 0.8 Pressure port 4 5 6 R1.5 14 3 C0.5 1 2 3 Terminal leads Labelled faceplate 0.6 Vent hole 32 4.5 1 0.5 15.24(600mil) 2.54 2.54 Recommended footprint for PCB 6- 0.9(Diameter of through holes) 6- 1.8(Diameter of lands) 1.2 60 2.8 6.8 15.2 unit (mm) 2 2.54 2.54 2.54 2.54 0.5 Pre-amplified/3V Excitation/Gauge Outline dimensions X3PM,X3HM Data sheet X3HM-R 1 2.54 2.54 2 3 unit (mm) Pressure port 6 5 4 (14) 1.2 1 3.2 1.55 2.6 6 0.6 4.7 5.5 15 10.16 0.25 Vent hole 3.4 (7.6) Labelled faceplate 8 6 5 4 Recommended footprint for PCB 6- 1(Diameter of through holes) 6- 1.8(Diameter of lands) 8 1 2 3 10 unit (mm) 3 2.54 2.54 1 Pre-amplified/3V Excitation/Gauge Connection diagram X3PM,X3HM Data sheet X3PM, X3HM Vcc Vcc(DC5V) Vout Vout GND C2 C1 Remarks : 1) C1 : Connect 680pF capacitor within 2cm distance from leads. 2) C2 : Connect 0.01 F or more capacitor within 2cm distance from leads. 3) 4 and 5 pins must be No Connection. Open them as floating ones completely, and do NOT connect to other line or each other. GND Transfer Function Vout=Vs (P Vs=3.0volts + ) (Pressure Error Temperature Error Multiplier Vs) Notes ; The output voltage (Vout) is no perfect ratiometric with the power supply voltage. P=Input Pressure(kPa) Model 050KPG(D) 100KPG(D) 100KPGV(DV) 100KPGW(DW) 200KPG(D) 001MPG(D) 115KPA pressure range 0 50kPa 0 100kPa 0 100kPa 100 +100kPa 0 200kPa 0 1MPa 15 115kPa.abs 0.01 0.005 0.005 0.0025 0.0025 0.0005 0.005 0.1667 0.1667 0.1667 0.4167 0.1667 0.1667 0.09167 Pressure Error(kPa) 2.5 5.0 5.0 10.0 10.0 50.0 5.0 Temperature Error Multiplier=1 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 4 E-mail : sensor@fujikura.co.jp

大小:152.47KB

所需财富值1

分享:
0

已有0人评价

浏览:389

贡献者:foooy

贡献时间:2013年04月08日

文档关键词

相关推荐

    热门文档

    您最近浏览过的文档