628MCL451

baTTery driveN, FTP-608 series 2” high sPeed TherMaL PriNTer FTP-628MCL401/451 n Overview The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. T he FTP-628 MCL Series can be used for a variety of a pplications, such as portable terminals, POS, banking terminals, and measurement and medical equipment. n highLighTs • Ultra low profile Height 2.8 mm, width 8.2 mm, depth 42.2 mm • High speed printing It can print at 60 mm/s (480 dotlines/s) maximum by using Fujitsu's unique head drive control. • Auto Cutter Full cut type and partial cut type printers are available by user selection. • Easy paper setting Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted. Conventional auto loading is also available. • Multifunctional die-cast form Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant. • RoHS compliant FTP-628DSL49R FTP-628MCL40  FTP-628MCL401/451 n ParT NuMbers Name Printer mechanism with cutter Printer mechanism without cutter LSI for driving Interface board for Mechanism/Cutter Interface cable Power cables Cutter supported Part Number FTP-628MCL40 (Easy Load Model) FTP-628MCL45 (Easy Load Model with platen bracket + lock lever) FTP-629CU45R FTP-628DSL49R Parallel (Centronics) / Serial (RS-232C) Parallel (Centronics) FTP-628Y202 Serial (RS-232C) Head, motor, logic FTP-628Y302 FTP-628Y402 n sPeCiFiCaTiONs Item Part number Printing method Dot structure Dot pitch (Horizontal) Dot pitch (Vertical) Effective printing area Number of columns Paper width Paper thickness Printing Speed Character types FTP-628MCL40 Thermal-line dot method 384 dots/line 0.25 mm (8 dots/mm)—Dot density 0.25 mm (8 dots/mm)—Line feed pitch 48 mm ANK 32 columns/line (maximum 2 x 24 dot font) 58 mm 60 to 00 µ m (some paper in this range may not be used because of paper characteristics) Maximum 60mm/sec. (480 dot line/sec.) at 8.5V Alphanumeric, kana: International characters: JIS Kanji (Kanji CG loaded board): 59 types 95 types about 6800 types Specifications Character, dimensions (W×H), number of columns 2 × 24 dots, (.5 × 3.0 mm), 32 columns: ANK 24 × 24 dots, (3.0 × 3.0 mm), 6 columns: ANK 8 × 6 dots, (.0 × 2.0 mm), 48 columns: ANK 6 × 6 dots, (2.0 × 2.0 mm), 24 columns: ANK 2 FTP-628MCL401/451 n sPeCiFiCaTiONs Item Interface For print head Power supply For motor For cutter motor For logic Dimensions Mechanism with cutter Interface board Mechanism with cutter Interface board Head Cutter Platen Operating temperature* Operating humidity Operating environment Storage temperature Storage humidity Head temperature detection Detection function Paper out/mark detection Platen release Movable blade Specification Conforms to RS232C / Centronics 4.2 - 8.5 VDC average current, 1.8 (2.4)A at 7.2V (print ratio: 12.5%, print speed: 60mm/sec. ) 4.2 - 8.5 VDC, 1A maximum 4.75 - 8.5 VDC, 1A maximum 5 VDC ± 5%, 0.1 A maximum 81.2 x 42.2 x 21.8 mm (WxDxH) 70 x 60 x12 mm Approximately 97g Approximately 25g Pulse resistance: 100 million pulses/dot (under our standard conditions); Abrasion resistance: paper traveling distance 50km (print ratio: 12.5% or less) 500,000 cuts 5,000 times (open/close) 0˚ C to 50˚ C 20 to 85% RH (no condensation) -20˚ C to +60˚ C (paper not included) 5 to 95% RH (no condensation) Detected by thermistor Detected by photo-interrupter Detected by sliding switch Detected by photo-interrupter High Sensitive Paper Standard paper: TF50KS-E4 (Nippon Paper) TF60KS-E(Nippon Paper), FTP020PU001 (58mm), PD105R (Oji Paper), FTP-020P0701 (58mm) TF60KS-F1, FTP-020P0102 (58mm), PD170R (Oji Paper), P220VBB-1 Mitsubishi Paper) PD160R-N (Oji Paper), AFP-235 (Mitsubishi Paper), TP50KJ-R (Nippon Paper), HA220AA (Nippon Paper) Weight Life Recommended thermal sensitive paper Medium Life Paper Long Life Paper *+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability) 3 FTP-628MCL401/451 n FuNCTiON OF iNTerFaCe bOard Item . 2. 3. 4. 5. 6. 7. Test print function Paper out detection Paper near end detection Platen open detection Thermal head temperature abnormality detection Blow-out fuse detection Head voltage abnormality detection 8. 9. 0. . 2. 3. 4. Item Cutter trouble detect Motor power saving function Mark detection function MCU operation abnormality detection Power ON/OFF sequence protection Motor over-current protection Hardware timer n diMeNsiONs 1. Printer mechanism FTP-628MCL40 printer 3.9 7.5 cutting position (54) printer position standard 42.2 3. 5.4 platen center paper exhaust position pa pe platen unit 8.2 10.7 2.8 lever r platen unit  Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open. Unit: mm 4 FTP-628MCL401/451 1. Printer mechanism FTP-628MCL45 5 FTP-628MCL401/451 2. Interface board (70.0) 3.25 50.5 25.5 3.25 .0 63.5 3.25 .45 30 CN3 CN8 2   CN4 8 (60.0) 53.5  CN 30 42.0 FGØ3.2 3.25 .2 3-Ø3.2 3.5 CN7 CN2  6  8 2  3.25 17.5 49.5 .25 Mounting height Mounting height .6 3 7 Note: . The size with parentheses is a reference value. 2. Part mounting height is maximum. Unit:mm 45.5 29 6 FTP-628MCL401/451 FTP-628MCL401 mechanism/cutter FPC PIN Assignment () For thermal head, motor and sensor Connector on control circuit: 5260-3090 (Molex or equivalent) No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 36 27 28 29 30 PH K VSE N PH E VH VH DI CL K GN D GN D STB 6 STB 5 STB 4 Vd d TM TM STB 3 STB 2 STB 1 GN D GN D LA T DO VH VH SW SW MT/ A MT/ A MT/ B MT/ B Signa l Content s Cathode for photo interrupto r paper sensor powe r Emittor for photo interrupto r Head drive power Data i n Cloc k Head ground Strobe 6 Strobe 5 Strobe 4 Logic powe r Thermistor Strobe 3 Strobe 2 Strobe 1 Head ground Data latc h Data ou t Head drive power Platen release switch Excitation signal A Excitation signal A Excitation signal B Excitation signal B 7 FTP-628MCL401/451 FTP-628MCL451 mechanism/platen bracket FPC PIN Assignment () For thermal head, motor and sensor Connector on control circuit: 5260-3090 (Molex or equivalent) No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 36 27 28 29 30 PH K VSE N PH E VH VH DI CL K GN D GN D STB 6 STB 5 STB 4 Vd d TM TM STB 3 STB 2 STB 1 GN D GN D LA T DO VH VH SW SW MT/ A MT/ A MT/ B MT/ B Signa l Content s Cathode for photo interrupto r paper sensor powe r Emittor for photo interrupto r Head drive power Data i n Cloc k Head ground Strobe 6 Strobe 5 Strobe 4 Logic powe r Thermistor Strobe 3 Strobe 2 Strobe 1 Head ground Data latc h Data ou t Head drive power Platen release switch Excitation signal A Excitation signal A Excitation signal B Excitation signal B 8 FTP-628MCL401/451 (2) For cutter Connector on control circuit: 5260-0890 (Molex or equivalent) No 1 2 3 4 5 6 7 8 VSE N PH E PH K MT/ A MT/ A MT/ B MT/ B NC Signa l Content s Home position sensor powe r Emittor for photo interrupto r Cathode for photo interrupto r Excitation signal A Excitation signal A Excitation signal B Excitation signal B Not connecte d Sensor (Photointerruptor) Platen unit Thermal head Motor Connector No (FPC pin 30,29, FPC Connect terminal: surface side Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (81-3) 5449-7010 Fax: (8-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp, The Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 02E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 17, 2007 9